Hunter Grill Guard installation help
#1
Member
Thread Starter
Join Date: Feb 2012
Location: Union County, NJ
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
Engine: 4.0L
Hunter Grill Guard installation help
I got one of those Hunter Grill Guards from Truck Direct on fleaBay. I was trying to install it last night (in 90+ heat). I ran into a problem. The bolts supplied (M10) that are used to mount the brackets to the frame seem to be too large, and too fine of a thread for the welded in nuts by the front swaybar. Rather than fighting with trying to tap the nuts does anyone know off hand the right size/thread bolt that I can just grab from Home Depot?
Note: these holes are adjacent (to the front, and rear) to the bushing mounts for the sway bar.
Thanks in advance...
Note: these holes are adjacent (to the front, and rear) to the bushing mounts for the sway bar.
Thanks in advance...
Last edited by KF2M; 06-21-2012 at 12:03 PM.
#2
Member
Thread Starter
Join Date: Feb 2012
Location: Union County, NJ
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
Engine: 4.0L
Well after trying numerous bolts I couldn't find the right thread. Tapped them to 3/8", adn got the push bar mounted, and wired up the lights..
Last edited by KF2M; 06-26-2012 at 09:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)