How do i adjust the Kickdown cable on my jeep
02-19-2009, 06:03 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 5.2L
How do i adjust the Kickdown cable on my jeep
i have a 1994 GC 5.2L v8 and i just had a Kick down cable put on my truck and i need to know how to adjust it. 
properly i was told to pres the button on it but im not sure and how to do it. 
is there any specs for shifting of a 5.2l v8 from crysler? THANKS 
properly i was told to pres the button on it but im not sure and how to do it. is there any specs for shifting of a 5.2l v8 from crysler? THANKS
02-19-2009, 11:04 PM
#2
Seasoned Member
Join Date: Sep 2008
Location: Medicine Hat Alberta
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2
I didn't think you could adjust them with the cable. If you want to check it, then have someone hold the throttle wide open. you should be able to move the lever on the trany about an 1/8" or so. It should not bottom out but be very close. to loose and you don't get enough pressure on the clutches. cause shifing to early, and of course poor kickdown. which all relates to over heating of the internal parts, cause by friction. friction is bad.
Thread
Thread Starter
Forum
Replies
Last Post
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
07-08-2022 05:17 PM
Bugout4x4
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
08-27-2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)