N20jeep

So you have it back together? And its still leaking?


It's not ideal, but it should be ok

N20jeep

So you have it back together? And its still leaking?


It's not ideal, but it should be ok

x91j

ya we put it all back together and its leaking really bad. im not even driving it and its leaking alot

7urtle

jb weld and let it cure for the full 24 hours. do you have the broken peice?

x91j

i did till it fell in the oil and my buddy dumped it!

x91j

so how do i go about it without the piece

7urtle

that may be the problem.may need to go fishing

x91j

problem is im out of town and its at my buddys garage. hopefully they didnt clean!! if i cant get it should i even attempt to fix it

Hommersimpson

opps yes that ill be a problem.. just had to take another look and its not good place...

cherokee94&99

For the location trying to JB weld it and getting it to cure right will be a b#$%h. Think your f#$%ed nows a good time to learn how to do an engine swap i guess. I had a block crack on me where the motor bolts up to the trans. I JB welded it after i cleaned it real good but then again that was a better place to work on it. Suppose if you have the piece that chipped off you might have better luck but i think you are pretty much sol on a fix for that. Try it, hope for the best but expect the worst and in the meantime start looking for another engine, thats what i would do.

x91j

Found a 97 4.0 but my jeeps a 95. Guy wants 150$ and its got 120k on it. He removed it because he got rear ended. I don't know if it will work since its an obd2 engine.

7urtle

may be swap a few sensor

x91j

Like what? He's only got the engine

N20jeep

it will work

x91j

I heard the only thing that may not work is the temp gauge.