Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

HELP!

Thread Tools
 
Search this Thread
 
Old Aug 28, 2010 | 08:12 PM
  #1  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Exclamation HELP!

my grand cherokee is not running right guys ok this is what it does whenever i`m going forward it shakes really bad and when i`m in reverse the motor bogs down like it`s gonna stall help guys i bought it yesterday
Reply
Old Aug 28, 2010 | 08:38 PM
  #2  
EPI505's Avatar
Newbie
 
Joined: Aug 2010
Posts: 2
Likes: 0
From: Los Lunas
Year: 1991
Model: Cherokee
Engine: 4.0
Default

My 1994 shaked like crazy. The motor mount where bad, I replaced the mount and it fixed it.
Reply
Old Aug 28, 2010 | 08:45 PM
  #3  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Question

what i meant was it shakes lurches and runs like crap whenever i`m at a stoplight or backing up and when in reverse the motor bogs down and acts like it wants to stall but it don`t
Reply
Old Aug 28, 2010 | 09:58 PM
  #4  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

What engine do you have?
Reply
Old Aug 28, 2010 | 10:00 PM
  #5  
Willys55's Avatar
Caracticus Potts The Mod
 
Joined: Jul 2009
Posts: 5,298
Likes: 9
From: Hainsville, NJ
Model: Grand Cherokee
Default

once you get off from the stop does it smooth out?
Reply
Old Aug 28, 2010 | 10:06 PM
  #6  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Smile

i got the 4.0 and yeah it smooths out after that
Reply
Old Aug 29, 2010 | 06:33 AM
  #7  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Question

any help guys???????
Reply
Old Aug 29, 2010 | 06:09 PM
  #8  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

It may be the idle air control motor not adjusting the idle speed. If you keep your foot on the gas does it run ok?
Reply
Old Aug 29, 2010 | 08:32 PM
  #9  
redfox's Avatar
Newbie
 
Joined: Aug 2010
Posts: 20
Likes: 0
Model: Cherokee
Default

It's a bit hard without more info:
Does it run smooth in N or park?
Check the transmission fluid levels. Low fluid level will make the trans engage a nd disengage as it runs low on fluid... it will be a voilent shake.
I am not 100% on the auto trans for jeep but it may need adjusting if it trying to pick-up reverse and 1st at the same time (like a trans brake effect)
Or the torque/ stall converter needs some attention.

If it shakes and rattles in park then these last words are useless to you
Reply
Old Aug 30, 2010 | 07:25 PM
  #10  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Default

could it be a burnt valve?
Reply
Old Aug 30, 2010 | 08:40 PM
  #11  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Smile

yeah in park and neutral the shakes stop and when i hit the gas it don`t do it

Last edited by 96jeepcrawler; Aug 30, 2010 at 08:41 PM. Reason: misspelled
Reply
Old Aug 30, 2010 | 10:36 PM
  #12  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

Sounds like a vacuum leak, do you hear any hissing around the intake and vacuum lines?
Reply
Old Aug 31, 2010 | 08:22 AM
  #13  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Question

no
Reply
Old Sep 2, 2010 | 02:42 PM
  #14  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Default

what else could it be?
Reply
Old Sep 2, 2010 | 05:44 PM
  #15  
96jeepcrawler's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 58
Likes: 0
From: west virginia
Year: 1998
Model: Grand Cherokee
Engine: 4.0 6cyl
Default

i found out what it was the plugs were gapped at 0.20 they were supposed to be at 0.35
Reply



All times are GMT -5. The time now is 01:53 AM.