Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

Help!

Old Oct 27, 2012 | 08:37 AM
  #1  
xmomma's Avatar
Thread Starter
Newbie
 
Joined: Oct 2012
Posts: 1
Likes: 0
Model: Cherokee
Unhappy Help!

Hi! I just bought a 98 grand cherokee the other day, the truck has 155k on it, minor rust on the tailgate only and a cracked windshield. My mechanic friend came with me, and examined it, and said it was in decent condition. We are going to replace the U joints, tie rods, do an oil change and a general tune up. Here's the thing. The kid I got it from had a big stereo system in it. I had no use for 2 12 inch subs and an amp. I had him remove them before I purchased it, and now it won't start. Help. Did he fry the battery or alternator with the stereo? How do I figure out where the problem is coming from?
Reply
Old Oct 27, 2012 | 08:41 AM
  #2  
gajeepguy's Avatar
Junior Member
 
Joined: Oct 2012
Posts: 93
Likes: 0
From: Blue Ridge, GA
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Check all the fuses? Also make sure tgw wires leading to the amp are properly capped off.
Reply
Old Oct 27, 2012 | 02:50 PM
  #3  
KD3NE's Avatar
Senior Member
 
Joined: Feb 2011
Posts: 719
Likes: 0
From: Bel Air, Maryland 21015
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Originally Posted by xmomma
I had him remove them before I purchased it, and now it won't start. Help.
Did it run after he removed them before you bought it?

When you say it won't start what do you mean?

Motor cranks but no start?

Motor won't crank at all, turn the key and get nothing?

Do the lights come on?

Does the horn blow?

Whenever I turn the key and get nothing, I hit the horn ... kind of lets me know it the battery has juice or not.
Reply
Old Oct 28, 2012 | 09:09 AM
  #4  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Check the battery cables. Chances are he disconnected the battery and didn't reconnect it properly. The positive (+) terminal is smaller in diameter and the clamp tends to stretch out so it won't tighten well. If there is no gap between the halves at the bolt, that's your problem.
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:31 AM.