hatch open on VIC randomly?
#1
Member
Thread Starter
Join Date: Jun 2013
Location: Kansas City, MO
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 5.2L V8
hatch open on VIC randomly?
So when I bought the Jeep it had no bolts holding down the latching mechanism and the bump stops were destroyed. So I replaced the rubber boots and found two bolts to hold the latch to get rid of that annoying rattle.
But now whenever I park on a hill steep enough with the engine at a higher point than the hatch it'll say it's opened. Also when I'm driving and hit a bump or take a turn the VIC will start beeping at me which is almost worst than the rattle. The only thing I found is this wire that's not attached. Any suggestion where to look/how to fix?
But now whenever I park on a hill steep enough with the engine at a higher point than the hatch it'll say it's opened. Also when I'm driving and hit a bump or take a turn the VIC will start beeping at me which is almost worst than the rattle. The only thing I found is this wire that's not attached. Any suggestion where to look/how to fix?
Thread
Thread Starter
Forum
Replies
Last Post
Crazynut1997
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-29-2015 08:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)