Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

Funky noise near the front of the transfer case 2000 grand cher(quad trak)

Thread Tools
 
Search this Thread
 
Old Sep 23, 2013 | 01:38 PM
  #1  
xxlcherokee's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2011
Posts: 51
Likes: 0
From: cleveland
Year: 1993
Model: Grand Cherokee
Engine: 4.0
Default Funky noise near the front of the transfer case 2000 grand cher(quad trak)



Fellas
Last winter while turning tight left in my parking garage I would hear noise from the front of my 2000 grand cherokee. I figured that it was the front axle clicking, because it sounded like an axle click. Well the truck was parked till last week when I pulled her out. As I backed her out to take off, I could hear the clicking noise even when going straight. Now here is the odd part, it doesn't do it till she is driven about 1/2 mile and it's intermittent. I immediately took her back home and looked up front. I saw the front right axle boot was split, but after listening very close, the noise was not coming from the axle. I drove her to my buddies shop because he has a lift. After putting it in the air I was able to hear more precisely where the clicking noise was coming from. It was closer to where the front drive shaft was going into the transfer case. Is this actually called a drive shaft since it doesn't have ujoints like the rear drive shaft?
Attached Thumbnails Funky noise near the front of the transfer case 2000 grand cher(quad trak)-image-2914581058.jpg  
Reply
Old Sep 23, 2013 | 03:49 PM
  #2  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Yes, it's the drive shaft. It just has CV joints rather then u-joints. With a split boot, the grease is probably gone and water has invaded the joint and ruined it.
Reply
Old Sep 23, 2013 | 04:23 PM
  #3  
JBimmolate's Avatar
Member
 
Joined: Mar 2013
Posts: 197
Likes: 0
From: Nor Cal
Year: 1994
Model: Grand Cherokee
Engine: 4.0
Default

When my customers have issues with the front shaft I have the driveshaft shop replace the CV style end with a std u-joint and companion flange to keep it from happening again.

Miles
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
Mcwille117
Engines/Tranny/T-Case
1
Aug 30, 2015 12:20 PM
Mcwille117
Engines/Tranny/T-Case
2
Aug 28, 2015 11:41 AM
kjc
Engines/Tranny/T-Case
0
Aug 25, 2015 07:29 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 01:18 AM.