Hey all, I would like to change my frame rail fuel line from the tank to the front. I did some research on this with parts stores and dealership and pretty much came up empty handed.
This is for a 1995 Cherokee. I replace the floor pans last year for inspection plus all of the break lines. I'm getting ready to do a fuel tank as well and figured I would get er done in 1 shot.
Any recommendations would be great !

 

Welcome to the forum.

"This is for a 1995 Cherokee." The topic was posted in the Grand Cherokee forum, not the Cherokee forum.

Why not just fabricate a replacement, using the original as a template?

 

Opps my goof! I will relocate it. Using the old one as a template is not the problem. I need to know what type of material is used cause I was asked that question by someone at an auto parts store + there are those compression type fittings that would also be a special size probably done with a special tool like that of a flaring tool used for break lines. It's a similar type fitting used on the transmission line to the radiator. That sort of thing but I will give a shout out on the right page.

 

Not sure why your parts guys had trouble with this. Took me all of 2 minutes on Google.

Fuel Supply Line Front 1994-1998 Jeep Wrangler Cherokee YJ/XJ/ZJ:

https://www.ebay.com/itm/Fuel-Supply...ts=Make%3AJeep

It runs from the frame rail mounted fuel supply line to the fuel rail. Replaces OE 52127633

OEM Mopar 52127633:

https://www.moparpartsgiant.com/part...~52127633.html

 

That's really strange. I went through this about a year ago and that's what happened. I remember the factory drawing that the parts guy from the dealership was showing me and that looks familiar.
He told me that The dealership didn't support that part any more. Thanks very much and I will look into this! The one from e bay looks like the one line that was bad enough for me to replace.
Looks like the other one is the complete kit.

 

No problem. Good luck.