Dumb blonde needs advice on wiggly jeep!
#1
Newbie
Thread Starter
Join Date: Mar 2011
Location: Richmond, VA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2005
Model: Cherokee
Dumb blonde needs advice on wiggly jeep!
Quick question for everyone- I purchased an 05 V6 grand cherokee a few months ago. Recently it's started shaking when I brake from a higher speed, usually anything over 45mph. Any idea what is and how much it will be to fix? It has 75,000 miles on it.
Thanks!
Amanda
Thanks!
Amanda
#2
CF Veteran
Join Date: Feb 2011
Location: southern indiana
Posts: 1,707
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Sounds like you need new front rotors and brakes . Probably run you around120 for parts . That's just my opinion.
Last edited by highwater; 03-23-2011 at 09:42 PM.
#3
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
^X2 on needing new rotors and brake pads. Some might tell you to have your rotors turned but there's not a huge price difference between doing that and getting new ones.
And Welcome to CF.
And Welcome to CF.
#5
Newbie
Thread Starter
Join Date: Mar 2011
Location: Richmond, VA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2005
Model: Cherokee
Thanks so much everyone! This is always been my dream car and I'm glad it's nothing major, will take it to the car doctor asap before it gets any worse.
#7
Member
Join Date: Feb 2011
Location: Ocala, Florida
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Could also bee rear brake drums, if you have rear drum breaks, or the rear rotors if its 4 wheel disc brakes, but most likely it is your front rotors.
Trending Topics
#8
Newbie
Thread Starter
Join Date: Mar 2011
Location: Richmond, VA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2005
Model: Cherokee
Thanks, I had an infiniti qx4 before this so I'm sure the jeep will be a welcome break on my wallet as far as parts are concerned, those were hard to find and expensive!
#12
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Tell them your brake pedal is kicking back because of heat warped rotors and you want the front pads and rotors checked/replaced.
My '04 used to eat rotors until I started using ceramic pads. They last longer now, and you don't get all that black brake dust on the wheels.
My '04 used to eat rotors until I started using ceramic pads. They last longer now, and you don't get all that black brake dust on the wheels.
#13
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Be sure to hand torque your lug nuts anytime you have to take the wheels off and put them back on. Some people have a heavy finger on the impact wrench trigger and will warp the rotors by over torqueing the lug nuts.
Thread
Thread Starter
Forum
Replies
Last Post
jghaenlein
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-27-2015 07:07 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
40
08-26-2015 12:08 AM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)