My Zjs a 97 and Ive already replaced the driver side door once, and Im still crawling over to the passenger side to get in and out of it. The top door pins are bad, while at the junkyard pulling the door off we tried to get off the top door pins but could figure out how to get to them. Its getting downright annoying to crawl out the passenger door, since Im too short to Bo Duke it.
How can I get to the top door pins?

 

I don't normally crosslink... Door pin replacement isn't hard, but you need a Dremel or small cutoff tool. If you've already pulled a door off, this will be easy.

I need to find just the bushings now, since the replacement bushings wear pretty guick, but the replacement pins are just fine. I need to replace my lower pin and bushings, meant to the last time I had the doors off towards the end of summer...

 

ok my mistake its not the door pins, (my technical jargon needs work I realize that) Im having an issue with the actual hinge. I need to replace top hinge and couldnt figure out how to remove it. T