drivelines required on 4 inch lift?
12-24-2009, 04:50 PM
#1
Newbie
Thread Starter
Join Date: Dec 2009
Location: California
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2 v8
drivelines required on 4 inch lift?
1993 jeep grand cherokee limited. i would like to do a 4 inch rough country lift does that require new drivelines? i have read multiple responses yes and no i would like a straight answer.
12-24-2009, 05:57 PM
#2
Member
Join Date: Nov 2009
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
my cousin has the same set up and his has been on all summer/fall and so far this winter, he had to replace the front U joints but he has had no problems, and we did not use the tcase drop
if you run 32's you will need to trim the front bumper and a small bit on the back side of the fender, i would also suggest rolling the lip on your rear fenders
if you run 32's you will need to trim the front bumper and a small bit on the back side of the fender, i would also suggest rolling the lip on your rear fenders
12-26-2009, 02:12 PM
#5
Member
Join Date: Nov 2009
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
we put it on but i dont think youll need it, just get an alignment asap
also i would get the steering stabilizer because it wanders everywhere lol and i would get an ajustable track rod because the drop bracket for the track rod is a POS. the bolt would always break and you would get death wobble, so those are the 2 things i would be sure to do
have fun doing the rear upper controll arm bracket lol (only room for open end wrench with 1/4 turns lol
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)