Cold start engine...rpm's at 1 k?
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 39
Likes: 0
From: Pacific Northwest north of 50
Year: 1993
Model: Grand Cherokee
Engine: 4.0
I have had my 93 ZJ 4.0 (129,000 KLM) for 3 weeks and when I start the engine the rpms are at 1 k?
Why does it not rev higher to say 2k to warm up?
What should I look for to correct the problem?
Why does it not rev higher to say 2k to warm up?
What should I look for to correct the problem?
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 39
Likes: 0
From: Pacific Northwest north of 50
Year: 1993
Model: Grand Cherokee
Engine: 4.0
Ok...got no responses....is this normal for a 4.0 ZJ?
I had a Mazda (929) and it would set idle at 2200 rpm on cold start...but the ZJ just fires up at 1K... and stays there...???
I had a Mazda (929) and it would set idle at 2200 rpm on cold start...but the ZJ just fires up at 1K... and stays there...???
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 39
Likes: 0
From: Pacific Northwest north of 50
Year: 1993
Model: Grand Cherokee
Engine: 4.0
Member
Joined: Feb 2012
Posts: 229
Likes: 0
From: Union County, NJ
Year: 2002
Model: Grand Cherokee
Engine: 4.0L
If it failed you would be getting a MIL. The plunger on it might have crud built up on it. The IAC is located on the throttle body. On my 02 if you are looking at the tb it would be on the rear facing side of the TB closest to the engine.
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Aug 31, 2015 12:41 PM
Jethro4days
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Aug 25, 2015 08:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



