Grand Cherokee 1993
I have replaced my CV boot joint and one of my bolts need to be replaced, i did manage to use it but it needs to be replaced in the future. But where can i get this bolts? its the bolts from steering knuckle to the hub. I have search everywhere but i cant find it. Since they are black i belive they are better quality than ordinary bolts?

A tip, if the 12pt 13mm slips use a 6pt 13mm pipe and twist it so its get a "grip" and hammering it on, i then used a 25cm long arm and got the bolt loose when i hammered on the arm, so the 6pt 13mm got a good hold on the bolt :-) But that bolt need to be replaced some time. I also used 1/2 a box of something like PB Blaster.

 

Any Jeep dealership I'd imagine...I was missing a couple bolts that go to an alternator and they had them in stock...

 

I pulled one of them out, took it to my hardware store, and got new ones. The ones I bought didn't have the ridiculous 12pt head. I've seen the size of the bolt and threads on Jeepforum somewhere, if you apply yourself you could find it and get new bolts.