Binding in turns
10-31-2016, 03:11 AM
#1
Newbie
Thread Starter
Join Date: Oct 2016
Location: Elkhart, IN
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: Chrysler Magnum 5.2L
Binding in turns
I have a 94GC that binds up when turning in parking lots or at low speed, I've been told its the VC. I've decided to just scrap the 249TC and replace it with a 242TC, however, I am wondering if I need to also buy a shifter assembly or will the one already in the jeep work.
Specs are as follows:
1994 Jeep Grand Cherokee Laredo
5.2L QuadraTrac
Specs are as follows:
1994 Jeep Grand Cherokee Laredo
5.2L QuadraTrac
10-31-2016, 07:30 PM
#2
Old fart with a wrench
Welcome to CF!
The shifter itself will work, but you'll be feeling for the gears unless you change the shifter bezel as well. You also may not have the neutral detent.
The shifter itself will work, but you'll be feeling for the gears unless you change the shifter bezel as well. You also may not have the neutral detent.
11-01-2016, 04:39 AM
#4
Old fart with a wrench
That's a matter of choice and availability. The 231 is stronger and more plentiful, but 4wd is part time only. The 242 is my choice for a box because it gives you full time 4wd as well. Check out http://jeepforum.com/forum/f13/trans...-np242-685644/
Last edited by dave1123; 11-01-2016 at 04:42 AM.