put new outer tie rods on the jeep today and my steering stablizer bracket rusted away..i have a after market bracket but dont know where to mount it to so i can add my new stablizer......pic of the bracket is below any help would be nice thanks ......and its axel side passenger front and i have no mounting hole where old was at due to it falling apart

That bracket looks like it clamps on the steering rod. On my WJ, it's clamped just behind the pinch clamp for the tie rod end on the passenger's side. The big bolt is for the stationary bracket on the frame.

95 jeep grand cherokee 4.0 .....

Welcome to the forum.

The steering stabilizer is a long blade welded onto the axle.

If proper operation is to be restored, then that part should be recreated.

Nice pic and pretty paint, but it hardly shows the stabilizer at all.

The part that rusted off is above the rotor.

Here are images showing the stabilizer bar bracket and the stabilizer bracket.