jethrocreek

So on my 95 grand cherokee, one day I blew fuse #12, replaced worked great.
2 days later blew again. Tested with Ohm meter, was within limits with circuit on, but battery removed testing from ground to fuse.

Replaced fuse again, worked great for week, blew fuse and needed to get home only had a 20 amp with me (norm a 15 amp). Worked great, forgot it the next morning was great for a couple weeks, blew again.

Pulled all parking/ marker lights (Dash indicator said issue with rears) Light bulbs good, Sockets good. Ohming from socket to ground showed short. Disconnected wire harness for lights Wire harness good. Wire harness to body showed short.

Checked front lights, exactly the same readings. Noticed my dash lights out and water temp gauge not working, all other gauges seem fine.

Haynes guide says there is a connector under rear seats that may be an issue, but I am suspicious of the BCM possibly being a culprit as well.

Any advice?