gona lift my 94 grand 6cyl. heard i can take front springs and move to rear and put front springs out of a 8cyl model under my front ? also anything else i need to do ? any help would be great. thanks

 

uhm, i may be wrong, but i dont think putting your front springs in the rear is the safest thing to do!!

 

And, you would have more help if you posted this in the tech section!

 

yeah...its the front to rear swap....lots of people doing it. most kits come with new front springs and four shocks....i believe it get you 2.5-3in of lift. just make sure to reinstall all of the spring retainer clips!

 

The RC 3.5" kit comes with front springs and instructs to use the old fronts on the rear.

My son has a similar set up on his ZJ and it has been trouble free.

Not sure how much lift the V8 springs will get you? Let us know how it goes (or went, as it were) and post pics.

 

Its actually rather common.

Moved to GC tech.

 

Front/rear swap is very common. I also don't know what the v8 spring will do for ya. Also your going to have to check your track bars, most kits come with a rear track bar relocation mount. And check your brake lines. After you swap the springs try to get your axles to droop and see if your brake lines are long enough. Don't want your travel limited by short brake lines.