94 Grand Cherokee
#1
Newbie
Thread Starter
Join Date: Jan 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
94 Grand Cherokee
Anyone know how to access the marker/brake lights for the rear on a 94 GC? I have one out and believe it or not it's the first time!... I hate to take it somewhere for a simple bulb when I can do it myself.
Thanks!
Thanks!
#2
Newbie
Thread Starter
Join Date: Jan 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
94 Grand Cherokee
Anyone know how to access the marker/brake bulbs for a 94 GC?... Simple question I know, but don't want to break anything if I can get some direction... I thought it would be from an inside panel but that's not the case??
thanks!
thanks!
#4
CF Veteran
You talking getting the tail light off to change the bulb?
If so it's simple, open the hatch, look at the tail light you want to remove there will be 3 10mm bolts. Remove them than pull the tail light off. It will pull a little hard cause there are 2 snap clips on the outer side. Than you can remove the light bulbs.
Hope this helps.
If so it's simple, open the hatch, look at the tail light you want to remove there will be 3 10mm bolts. Remove them than pull the tail light off. It will pull a little hard cause there are 2 snap clips on the outer side. Than you can remove the light bulbs.
Hope this helps.
#5
CF Veteran
Unlike some cars where there is a little access door for the bulbs, on these Jeeps you actually have to take the entire tail light assembly off to change a bulb.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-27-2015 05:49 AM
Katt Dogg
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-25-2015 08:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)