Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

93 hinge pins ??

Thread Tools
 
Search this Thread
 
Old 05-24-2017, 06:44 PM
  #1  
Newbie
Thread Starter
 
Shimmytay's Avatar
 
Join Date: May 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default 93 hinge pins ??

I have removed the sloppy hinge pins on a 93 grand Cherokee to find out no one carries replacement pins and bushings . Has anyone else run into this ? Where do I get replacements ? Thanks in advance , I'm careless and doorless
Old 05-24-2017, 07:32 PM
  #2  
Senior Member
 
blueseasons's Avatar
 
Join Date: Sep 2013
Location: Santa Cruz Ca.
Posts: 518
Likes: 0
Received 3 Likes on 3 Posts
Year: 2000 WJ
Model: Grand Cherokee
Engine: 4.7
Default

Not it? http://www.dormanproducts.com/itemde...3&SEName=38439
Old 05-24-2017, 07:37 PM
  #3  
Newbie
Thread Starter
 
Shimmytay's Avatar
 
Join Date: May 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default Could be ?

How could I find out ? Was hoping someone has had the same issue.
Old 05-24-2017, 08:24 PM
  #4  
Old fart with a wrench
 
dave1123's Avatar
 
Join Date: Nov 2010
Location: Manlius, east of Syracuse, NY
Posts: 14,398
Received 723 Likes on 628 Posts
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Worse case scenario, you could have a local machine shop make them, or modify the newer style to fit. Check with the classic car guys. I'll bet ones for an AMC car will work.
Old 05-25-2017, 09:03 AM
  #5  
Senior Member
 
blueseasons's Avatar
 
Join Date: Sep 2013
Location: Santa Cruz Ca.
Posts: 518
Likes: 0
Received 3 Likes on 3 Posts
Year: 2000 WJ
Model: Grand Cherokee
Engine: 4.7
Default

How? Buy em. They are cheap enough. Not much lost if they don't. Got to be cheaper than having them made. Try looking for the whole hinge assembly?
Old 05-25-2017, 06:40 PM
  #6  
Old fart with a wrench
 
dave1123's Avatar
 
Join Date: Nov 2010
Location: Manlius, east of Syracuse, NY
Posts: 14,398
Received 723 Likes on 628 Posts
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Sorry guys! Being a toolmaker of over 50 years, it seemed like a simple thing to make new ones, forgetting about how much it would cost at a shop. My bad!
Old 05-26-2017, 10:56 AM
  #7  
Newbie
Thread Starter
 
Shimmytay's Avatar
 
Join Date: May 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default No luck

I've boughten three different sets of pins and bushings and none have fit . Looks like I'm heading to a machine shop . Unless you want to make and send me some Dave lol

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 01:51 PM.