well guys time to start putting this thing in the sky! after getting stuck for 3 hours setting up treestands its time my big Q is can u go 6" with out going with a long arm kit and if any has my Q is how also will it be ok to drive on highway and not all over the place thanks i hope some one can help, dave

 

Yes you can but the ride will be bad. If your going short arm lift that high do yourself a favor and get some good quality control arms.

My Q to you is why 6"?

 

i hope you looked into the "death wobble" its not fun

 

yeah i put 4 inches on a 1989 cherokee and i can't go over 35 we have looked at everything to try and fix the death wobble everything is done right everything is tight nothing is broken there is absolutly nothing wrong but it still has the death wobble, is it because we stayed with the short arm kit. would the long arm kit get rid of it or is the long arm kit to much for a 4 inch lift

 

I'm at 6"s with my 89 cherokee and run short arms. I drive 30 miles one way to work on the highway at 60-65 no wobble or vibes. It all depends on how you set up your rig and how much you spend.

Kdm 3769: I would check your caster if you can't drive it over 35. Also check track bar and do some research on death wobble. There's a few good sites for adjusting your caster and camber when you search "google".

 

To add to this, Kdm 3769 did you get an alignment after lifting it? I am at 6.5" on my XJ with short arms also. I don't mind the ride because it is a trail rig only.