249 Transfer case swap
11-15-2011, 01:22 PM
#1
Newbie
Thread Starter
Join Date: Nov 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
249 Transfer case swap
I have a 95 limited 5.2 with a 249. I found a doner transfercase in a 97 limited with selectrac and a 5.2 also.
Can I use this TC without many mods/ Should I also take the tranny out? I can get them bothe for 300.
I think I need to swap the input shaft is this always the case.
Can I use this TC without many mods/ Should I also take the tranny out? I can get them bothe for 300.
I think I need to swap the input shaft is this always the case.
11-15-2011, 02:06 PM
#2
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
You need to count the transfercase input shaft spline count and length, it both of those things are the same as the old 249 case it's just a bolt in swap as far as I know.
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
Shire_Man
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
09-15-2015 02:29 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)