...
|
Originally Posted by 2kdarkgreenxj
(Post 3392106)
I know what the problem is. You have a 2003 Grand Cherokee!!!
Lol, just some good ol' fashioned ribbon' bro:) You busting his balls or braiding his hair, I can't tell. |
wrong thread.
WHY are all posts getting magically put into the wrong thread??? I KNOW I posted in "what did you do today" this morning its in this thread..... |
Originally Posted by jackson1714
(Post 3231509)
hi. I have a 2003 Jeep Grand Cherokee Laredo with about 200,000 miles on it. Today my jeep started up fine. I put it in reverse to leave and it went smoothly but when I shifted to drive it didn't do anything? Some advice would be great, so I could know what I'm looking for or any common troubleshooting I could before I take it to the shop! Please help!
|
Put silicone hoses.
https://cimg5.ibsrv.net/gimg/www.che...70a074a445.jpg |
I got you mixed up with Remo73 who you quoted.
|
Originally Posted by 1tonxj
(Post 3393165)
Attachment 301660
Attachment 301661 Attachment 301662 Attachment 301663 Ripped off the Claytons link bridge/truss ...replaced with Artec 14 bolt and made a link bracket and increased vertical separation from under 8 to about 10 then cut some steel and made a link bridge tie to the diff cover the tube us 1.5 .250 wall the mounting tabs are a500 .500 thick plate with a grade 8 1 inch bolt in double shear...single shear rating is 94,000 ;-). And made about 4 passes around the tubes this plus the diff and pinion ties should prevent spinning a tube. Will be finishing the back brace and pinion tie in next week . gesh! I don't think you need to worry about that pumpkin spinning. |
Discovered the location of the Maintenance Reminder module under the dash and disconnected it! Reinstalled both front seats and center console. Replaced the trans shift indicator bulb. Did a basic steering toe adjustment so I can drive it to the alignment shop later. Connected and re-installed windshield washer reservoir. Found some more ground connections and refreshed them.
|
The good news is, you can turn off that "Related Thread" crap in your profile. I did, and I'm glad I did. If I could nuke it from the site completely, I would.
NOTE TO THE NEXT POSTER! THIS IS A ZOMBIE THREAD! PLEASE LET IT DIE! https://cimg8.ibsrv.net/gimg/www.che...9bdd2046c0.jpg |
All times are GMT -5. The time now is 04:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands