2001 jeep grand Cherokee
#1
Newbie
Thread Starter
Join Date: Jan 2018
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
2001 jeep grand Cherokee
It will crank but no start. We replaced camshaft sensor, crankshaft sensor, and ignition coil rail. Anyone have any ideas besides junking it.
#2
CF Veteran
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Was the WJ running prior to problems?
Is there compression?
Any incidents occur that resulted in problem?
6L or V8?
You have treated the ignition system. Is there good spark?
Is fuel pump running and is there good fuel pressure?
Assume there is also air.
Fuel + Air + Spark = Fire
Does it try to start?, ex fire but not keep firing?
I would be suspect of Throttle Position Sensor, EGR valve stuck, Neutral Safety Switch.
Is there compression?
Any incidents occur that resulted in problem?
6L or V8?
You have treated the ignition system. Is there good spark?
Is fuel pump running and is there good fuel pressure?
Assume there is also air.
Fuel + Air + Spark = Fire
Does it try to start?, ex fire but not keep firing?
I would be suspect of Throttle Position Sensor, EGR valve stuck, Neutral Safety Switch.
#5
CF Veteran
Have you checked to confirm that you're getting good spark? Also check the IAC valve too. If it's dirty enough that could give you fits too.
Thread
Thread Starter
Forum
Replies
Last Post
Jacob D Merritt
Modified XJ Cherokee Tech
0
06-04-2016 01:03 AM
scotth101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
03-05-2011 09:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)