gonzala

So I'm trying to replace the alternator on my 97 cherokee with the 160A from a 05 grand cherokee, so far it seems that it will fit with some minor modifications to the mounting bracket on the bottom but my questions/problems are about getting the electrical to work with each other.



so this is my old alt and I know power comes from the bolt in the center of the black connector on the left and goes to the PDC. Ground is the bolt on the far left I'm pretty sure. Now the brown piece just under the center of the unit with the 2 bolts protruding out of it are for the voltage regulator as far as I know.



This is the new alt its a Bosch AL6553x......any ideas?