Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

XJOE The Punisher Build

Old Oct 28, 2017 | 07:38 PM
  #1  
Joseph Edward Sellars's Avatar
Thread Starter
Newbie
 
Joined: May 2017
Posts: 2
Likes: 0
Model: Cherokee
Talking XJOE The Punisher Build

So I've been lurking this forum reading posts for some time now, I am a recent XJ owner and have always loved this Jeep platform but until now I have never owned one myself, and likewise I have never posted. Until now. Let me unveil all my hard work and effort over the past few months. Allow me to Introduce, The Punisher. Before and After the install of Rough Country's 6.5" Short Arm Lift Kit. I am really digging this lift and was pretty easy to install even if I did it all by myself. I did install the drop brackets, HD Tie Rod bar, Extended Brake lines, SYE and CV Driveshaft along with this kit, What a difference! I cannot wait to take this out to my Property and let loose! I did have to remove the front bumper end caps to allow the 33x12.50r15 tires on 3.75 backspaced wheels to fully turn, not a big deal as I will be upgrading the front bumper to a winch bumper, maybe another Rough Country Product is in my near future. I really think this kit is the best bang for your buck, Thank you Rough Country, for not making my Just Empty Every Pocket-JEEP too expensive to build. Thank you!


Before,



Before,



Before,



Before,



Before,



Before,



Before,



Before,



After,



After,



After,



After,



After,



After,



After,



After,
Reply
Old Oct 28, 2017 | 08:30 PM
  #2  
Biggsly's Avatar
Member
 
Joined: Oct 2017
Posts: 111
Likes: 0
From: OKC
Model: Cherokee(SJ)
Engine: 6 CYL HO
Default

Looks good.
Reply
Old Oct 29, 2017 | 08:50 AM
  #3  
TrailerTrash's Avatar
CF Veteran
 
Joined: Jun 2017
Posts: 2,215
Likes: 635
From: Hangover, PA
Year: 1998
Model: Cherokee(XJ)
Engine: 4.0L
Default

I LIKE it

Welcome from PA dude I'm sure you will find this forum most helpful
Reply
Old Oct 29, 2017 | 03:22 PM
  #4  
craigjacob1's Avatar
Seasoned Member
 
Joined: Nov 2016
Posts: 304
Likes: 5
From: Idaho
Year: 1990
Engine: Renix 4.0
Default

It looks pretty good so far. Black is a PITA, but it looks like it's in decent condition. I recommend clear paint protection film on the front hood and fender wells, and possibly on the lower doors to keep the paint from chipping in the future.

Just a heads up, if those headlights are not DOT approved, and will blind oncoming traffic.

Last edited by craigjacob1; Oct 29, 2017 at 03:26 PM.
Reply
Old Oct 29, 2017 | 09:20 PM
  #5  
Joseph Edward Sellars's Avatar
Thread Starter
Newbie
 
Joined: May 2017
Posts: 2
Likes: 0
Model: Cherokee
Default

Originally Posted by craigjacob1
It looks pretty good so far. Black is a PITA, but it looks like it's in decent condition. I recommend clear paint protection film on the front hood and fender wells, and possibly on the lower doors to keep the paint from chipping in the future.

Just a heads up, if those headlights are not DOT approved, and will blind oncoming traffic.
Thanks Guys, and craigjacob1 believe it or not but my headlights are DOT approved and they do not blind oncoming drivers any more than the hundreds of idiots that drive around with their brights on or with their lightbar on, plus I know how to adjust the throw of my headlights, many others don't even know how to change the oil in their engines, I've passed multiple cops and never once had an issue with the headlights
Reply
Old Oct 31, 2017 | 02:35 PM
  #6  
MoparNJeep's Avatar
CF Veteran
 
Joined: May 2012
Posts: 1,209
Likes: 5
From: Puyallup wa
Year: 1999
Model: Cherokee
Engine: 4.5L Stroker
Default

Looking good, just getting started on my black jeep build.
Attached Thumbnails XJOE The Punisher Build-20170821_085855.jpg  
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:46 AM.