WJ Progression Thread
Thread Starter
Newbie
Joined: Jan 2016
Posts: 20
Likes: 0
From: Tampa
Year: 2000
Model: Grand Cherokee
Engine: 4.0L
Just bought my first jeep and many parts lol. So, I figured I would create a build thread to track its progress. This is just a daily / play toy while my G35 gets built!
It's a 2000 WJ 2WD. 177k Miles.
Plans right now include:
Bushwacker Fender Flares
HID headlight Kit
New Carpet
Weathertech mats all around
New Hatch struts
Bilstein Shocks
Eibach suspension kit - No lift.
Before Pics:




It's a 2000 WJ 2WD. 177k Miles.
Plans right now include:
Bushwacker Fender Flares
HID headlight Kit
New Carpet
Weathertech mats all around
New Hatch struts
Bilstein Shocks
Eibach suspension kit - No lift.
Before Pics:




Thread Starter
Newbie
Joined: Jan 2016
Posts: 20
Likes: 0
From: Tampa
Year: 2000
Model: Grand Cherokee
Engine: 4.0L
Current issues that I have found:
Blower motor resistor. Blower only works on high.
Passenger front and rear door lock actuators don't work.
Steering is lose. Possible steering box or suspension issue.
All in all, not that bad. If anyone has any tips or links to get those parts from, id greatly appreciate it. If not, I know how to use google.
Thanks!
Blower motor resistor. Blower only works on high.
Passenger front and rear door lock actuators don't work.
Steering is lose. Possible steering box or suspension issue.
All in all, not that bad. If anyone has any tips or links to get those parts from, id greatly appreciate it. If not, I know how to use google.
Thanks!
Thread Starter
Newbie
Joined: Jan 2016
Posts: 20
Likes: 0
From: Tampa
Year: 2000
Model: Grand Cherokee
Engine: 4.0L
well, just pulled the trigger on a bunch of parts.
Glove box handle
ashtray
passenger side front and rear door lock actuators
hatch actuator
blower resistor
new wiper blades and arms
master door switch
a new antenna
and a crap ton of clips
Next week should be fun.
Glove box handle
ashtray
passenger side front and rear door lock actuators
hatch actuator
blower resistor
new wiper blades and arms
master door switch
a new antenna
and a crap ton of clips
Next week should be fun.
Thread Starter
Newbie
Joined: Jan 2016
Posts: 20
Likes: 0
From: Tampa
Year: 2000
Model: Grand Cherokee
Engine: 4.0L
Installed new glove box handle, new ashtray and dimmer switch on steering column and a new blower resistor. Upgraded the interior lights to LED, installed new hood and hatch struts. Replaced damaged front fender with matching from a junkyard, replaced passenger seat and one section of rear seat due to tears. Sourced from junkyard as well. A new master door switch and new headlight housings with HIDs.
Now off to getting the suspension upgraded / replaced.
Now off to getting the suspension upgraded / replaced.
Thread Starter
Newbie
Joined: Jan 2016
Posts: 20
Likes: 0
From: Tampa
Year: 2000
Model: Grand Cherokee
Engine: 4.0L
Installed new valve cover gasket, low pressure a/c switch, new battery, air filter
Installed new door lock actuators so now all the doors will lock / unlock. Also purchased a 11 blade gm fan to upgrade the 5 blade that is in it now. The electric fan died, so i bought one to replace that as well since the A/C is getting too hot.
Installed new door lock actuators so now all the doors will lock / unlock. Also purchased a 11 blade gm fan to upgrade the 5 blade that is in it now. The electric fan died, so i bought one to replace that as well since the A/C is getting too hot.
Thread
Thread Starter
Forum
Replies
Last Post
osinrider04
Miscellaneous
4
Jan 4, 2016 09:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



