I hear that man, my rear doesn't work and the fronts only have 2 speeds lol.

I don have front lol

So how is or did you lift your ride yet?

As soon as i get mine to run cooler i am lifting 2 ".


what kit did you go with?

Um havent lifted yet. I have a 2 in BB spring spacer kit, got it off someone off the forum for 50 bucks I think. It doesnt have shocks, just the spacers. Havent had a chance to put them on because something keeps coming up, like this next post.

Well I wasnt kidding when I said that this jeeps been an emotional roller coaster. So I went and picked up a wiper motor and assembly today since my wipers quit working, was pretty excited to have wipers since I havent had them in a cpl months. Did all the work and put the assembly in all for nothing. They still dont work, now I need to replace the switch.






Also went to go to work, radiators leaking somewhere a hefty amount of antifreeze... I just replaced the radiator like 2 months ago... they keep cracking. Idk why. It didnt overheat. So now I have to figure that out =/

your coolant mix might be lacking i had a heating issue poured SOLID Anti freeze in there and BAM 190

I never get above half way on the temp gauge, even with the ac on

Well woke up and decided to see what was wrong with the radiator hoping for the best but thinking the worst I climbed underneath and couldnt see where it was leaking, took my air box out and found that the fitting for the tranny line was leaking . Tightened it up and hopefully itll be all good. Boy was I relieved!

Also just scored some new to me tires for free, theyre bigger I hope they fit theyre 265/75/16s, my stocks are 225/75/16. Whats the biggest that would fit? They should for sure fit with the 2" BB im gonna install.

Got my HIR bulbs in today, gonna install them in a bit and see if they live up to their hype. Also I can stop being a padiddle.

I run 31 10.50s stock trimmed the front fender right out of the tire shop tho in there parking lot lol... pulled it out of the burneal garage and turned to the left and they rubbed the front fender soo borrowed a saw zaw and trimmed ohhh 2 inches off the bottom of the bumper never had a problem again.

Well heres my HIR review. So I thought theyd be a whiter, color but they are bright. Overall I like them. Glad I have lights again.

Before


Passengers side done



Drivers before


Drivers after


All done

I have to learn about tire measurements, I dont know what a 265/75/16 means... I know the 16 is rim. I know 31 is ht and 10.5 is width

Well today I went to get my sticker for the jeep and went out to discover that someone hit me! I have a dent in my front fender, scuffed paint and a hole and dent in my rear bumper.




So I used this sandpaper pad from my headlight restoration kit got it wet and the scuffs came right off, I need a little bit of wax and to buff out the spots.



And this is the leftover paint I used to paint my trim... I dont recommend it at all. Ive had to touch up over and over, it scuffs off but I used it to just get rid of the scuffs on the bumpers.



Didnt feel like taping anything off, used this as my overspray shield.



Popped the rear dent out and painted that spot too,




Just have to find a day I have off so I can take the front fender off and see if I can knock the dent out. How hard is it to take the fender off? And that hole is gonna have to stay, I dont know how to fix that either.

That sux man! I have the 96 cherokee service manual that covers body parts. If you want we could meet up and you could check it out. Im pretty sure its close to the same steps. From my understanding its a few bolts and then removing some plastic pieces