Will's 1 ton Cherocar
#526
Junior Member
I'm glad I got rid of the stuff that I had on the front. Looks way better now.
#527
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Yeah i like the way only the rear quarter panels are done now.
Yesterday i confirmed my mail lady is partially a gorilla. She delivered my rear disk brake setup i got for $120, saved me $50 compared to ordering from David. Plus this set came with ceramic rear pads.
Yesterday i confirmed my mail lady is partially a gorilla. She delivered my rear disk brake setup i got for $120, saved me $50 compared to ordering from David. Plus this set came with ceramic rear pads.
#528
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Yeah i like the way only the rear quarter panels are done now.
Yesterday i confirmed my mail lady is partially a gorilla. She delivered my rear disk brake setup i got for $120, saved me $50 compared to ordering from David. Plus this set came with ceramic rear pads.
Yesterday i confirmed my mail lady is partially a gorilla. She delivered my rear disk brake setup i got for $120, saved me $50 compared to ordering from David. Plus this set came with ceramic rear pads.
#534
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I'm waiting to put them on the 29 spline 8.25 out of my 98 parts jeep. I'm going to pull it, clean it, add disc brakes and my SOLID diff cover to it, and relocate the shock mounts.
#535
CF Veteran
Join Date: Jul 2012
Location: San Antonio, TX
Posts: 4,104
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
That's what I'm doing with mine..except for the shock relocation. And I'm going to have it geared while its out of the jeep and maybe get a locker while I'm at it
#537
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Added a sticker for my friend who passed away last year
Brackets installed. You can see my dying leaf packs and that the shackle angle is a little less than 45 but I'm not dealing with it again. It'll stay until I get new springs. Welded the bracket to the unibody in 4 places, drilled out the holes on my hitch to 11/16 and stuck the POS bumper back on
Brackets installed. You can see my dying leaf packs and that the shackle angle is a little less than 45 but I'm not dealing with it again. It'll stay until I get new springs. Welded the bracket to the unibody in 4 places, drilled out the holes on my hitch to 11/16 and stuck the POS bumper back on
#538
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Thank ya sir
#539
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Added a sticker for my friend who passed away last year
Brackets installed. You can see my dying leaf packs and that the shackle angle is a little less than 45 but I'm not dealing with it again. It'll stay until I get new springs. Welded the bracket to the unibody in 4 places, drilled out the holes on my hitch to 11/16 and stuck the POS bumper back on
Brackets installed. You can see my dying leaf packs and that the shackle angle is a little less than 45 but I'm not dealing with it again. It'll stay until I get new springs. Welded the bracket to the unibody in 4 places, drilled out the holes on my hitch to 11/16 and stuck the POS bumper back on
#540
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
The rear is definitely more soft. Tired of listening to my big *** toolbox in the back with everything rattling around in it. I need to add spacers to the drawers and compartmentalize it. Flexes way better for sure and it seems to have settled down an inch or maybe a little more