Starting work on '90 XJ
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
Well I got the front end all torn down! Took some measurements. Front end was at like 33 inches from the fender to the ground and the rear measured at 31 1/2 inches so yeah I have a little sag in the back. Got a bastard pack to fix that!!! Lol! Last thing I have to order are my disco's. Gonna ride without sway bar links and see how bad it is. Hopefully it'll be ok till I can order some. Well onto the pics...enjoy!!!
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
Got the front all finished. Started on the rear. Got the rear sway bar ripped out then had to quit to watch the Saints game...bummer!!! Will upload pics either later tonight or tomorrow.
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
yeah i'm not too worried about it. i don't drive far on my days off. drop the kids at school literally a mile away. that's about it.
Last edited by tactical40cal; Sep 26, 2010 at 08:51 PM.
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
here you go. there's few and i don't think i have to describe what's going on. think ya'll can figure them out on ya'll own right? lol! oh i ended up with 5.5 inches in the front.
CF Veteran
Joined: Jul 2009
Posts: 2,245
Likes: 1
From: New Jersey (Milltown, Lavallette, and Wayne)
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Jul 2009
Posts: 2,245
Likes: 1
From: New Jersey (Milltown, Lavallette, and Wayne)
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
yeah i got mine from this web site
http://www.lunghd.com/Tech_Articles/...udget_Lift.htm
pretty much everything is coming off that write up. it tells you what shocks to use and what not...
http://www.lunghd.com/Tech_Articles/...udget_Lift.htm
pretty much everything is coming off that write up. it tells you what shocks to use and what not...


