winginit

so with the AX-15 and 4:10 gears it seemed a bit low geared . So I am going from 31" tires to 33" about like everyone else LOL it never ends . My XJ is at 3" lift and I like the LCG idea, so its time to cut the fenders ,
I orderd some Napier Precision Products flat fender flares FF4-B 97-01 384.95 and a 50.00 off bleeping jeep discount code 334.95
And started to cut , not fun cutting up the jeep, hope this is a good idea LOL to late now . one down 3 to go , not to bad even got the washer bottle back in their and working .

winginit

Here is a good video on doing the flares if your thinking of doing them , it helped me .

winginit

I picked up some used tires for now , LT 33 x 12.50 - 15 PRO COMP X TERRAIN 450.00
and Pro Comp Alloy Wheels Series 1069, 15x8 with 5 on 4.5 Bolt Pattern - Polished 10 5 each 396.16

winginit

the front marker was cracked so I replaced them with these smoked ones . I like them gives it a clean look .
ebay 62.95
http://www.ebay.com/itm/1997-1998-19...72.m2749.l2649

winginit

I have a old 1976 sears road talker brand new still in the box , 40 chanel CB am, and 80 chanel SSB side ban , this is a great radio . I mounted a 102 inch stainless wip and a shorter one with a NLA 40 load coil .

winginit

And I added a 20" light bar in the front just to help . and mounted the switch in the dash , their is not much room for mounting switches in an XJ . I Tried to keep it low so it would not block the air to the radiator
20INCH 126W CREE Led Light Bar Flood Spot Work Driving Ebay 24.30 free shipping
http://www.ebay.com/itm/20INCH-126W-...72.m2749.l2649

winginit

I have been worried about getting the jeep stolen, so I made up a kill switch so it wont start . I dident want it to be easy to find, so a made it wireless . added a bosh 5 pin relay with the key off it will draw no power . you have to have the remote to start it .

Van_Homan

Love this build. I like to see some pictures of the whole Jeep, now that you have the new flares, wheels, and tires.

winginit

Yes, I will do that , I need to hit some trails and take some picks . I have a lot of little things to Finnish up tho . it never ends !!

winginit

Not sure if this was posted anywhere yet, but I'm looking to do an upgrade to my lighting on the Jeep with LED's. I was searching for the dome light bulb number and came across this entire list, and thought I'd share it. This is the list for the 99's but I'm sure it will be the same for 97-01 years. Hope it helps someone else out there as well.

Low Beam Headlight Bulb Size: H6054
High Beam Headlight Bulb Size: H6054
Parking Light Bulb Size: 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3157
Tail Light Bulb Size: 3157
Stop Light Bulb Size: 3157
High Mount Stop Light Bulb Size: 922
Fog/Driving Light Bulb Size: H3-55W
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 1156
Front Side marker Light Bulb Size: 194
Rear Side marker Light Bulb Size: 194
Ash Tray Light Bulb Size: 1891
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 561 or 906 or 912
Dome Light Bulb Size: 561
Step/Courtesy Light Bulb Size: 168 or 906
Trunk/Cargo Area Light Bulb Size: 561
Under Hood Light Bulb Size: 561
Instrument-General Light Bulb Size: 53 or 658 or 74 or PC194
Hi-Beam Indicator Light Bulb Size: PC194
Automatic Transmission Indicator Light Bulb Size: 658
Directional Signal Indicator Light Bulb Size: PC194

here is the link http://www.modifiedlife.com/1999-jee...lb-size-chart/
Here is another link https://www.osram.us/apps/vlrg-us/Vlrg/#

winginit

Took the under hood light apart , sanded all the contacts . the stock bulb was broken seems to be a common problem . looked around and found some LEDs on ebay . The way they fit, they ether face left or right, so I tried to put two in their one right one left seemed to work well .Sorry my camera doesn't take pictures in the dark well . And they were dirt cheep .10Pcs White LEDs Bulbs 561 562 . 6.19 with free shipping
http://www.ebay.com/itm/10Pcs-White-...72.m2749.l2649

SatiricalHen

Should solder a 3rd led to the two on there so it's facing out too. You have 10 of them so why not give it a shot.

winginit

Fixed, found one that was twisted , so now it faces the right way it's very bright .
http://www.ebay.com/itm/2x-CREE-Rigi...5ZI8wb&vxp=mtr

winginit

So I wanted to upgrade some lights to led's starting with the interior lights , I bought a kit on Ebay not cheep tho
1998-2001 Jeep Cherokee Interior LED Light Dome Lamp Model 1WL-XJ3 49.99
http://www.ebay.com/itm/1998-2001-Je...72.m2749.l2649

winginit

I pulled all dome lights and replaced them with LED's , wow what a difference's I think it is money well spent .
When I pulled the dome light, I found it had a circuit board in their , did some research and found it was for the remote door locks . I really like to have remote door locks , I find them to be very handy . If it was not prewired for it, I probably would not have spent the time to install them . I found a good used board with 3 remotes on ebay 126.00 with shipping , plugged it in and they work !! WOO HOO !!
,http://www.ebay.com/itm/Jeep-Cheroke...72.m2749.l2649