Renix ground upgrade?
#1
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Los Banos CA
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Renix ground upgrade?
Me and my buddy both have renix era Cherokees mine being a 89 and his an 88. He recently ran a 2 gauge cable from batt negative to the frame and noticed many improvements. I have done the same. Any other ground improvements I should do?
#2
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Los Banos CA
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I also have a stereo system in it and my head lights dim if I turn it up or there's a lot of bass. It's the main reason I ran a ground from frame to battery.
Amp is grounded to the 10 mm screw on passenger side rear seat belt assembly.
Amp is a 200 watt jbl 4 channel. 10 inch Kenwood hooked to rear channels an 6x9s hooked to front channels. 8 gauge power and ground wires. Plan on running another amp and upgrading power wire to 2 gauge. Jbl for speakers and hopefully a Rockford mono block for the sub.
Amp is grounded to the 10 mm screw on passenger side rear seat belt assembly.
Amp is a 200 watt jbl 4 channel. 10 inch Kenwood hooked to rear channels an 6x9s hooked to front channels. 8 gauge power and ground wires. Plan on running another amp and upgrading power wire to 2 gauge. Jbl for speakers and hopefully a Rockford mono block for the sub.
Last edited by 89cherokee2gtmudy; 10-18-2012 at 11:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
1
10-20-2015 03:53 PM
maverick23
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-25-2015 08:43 AM
ROCKRIDGE 4WD
Vendor Showcase
0
09-21-2015 12:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)