Fog light time!!
Cut a hole in the shifter bezel for the switch and re sprayed it in semi gloss




Some cheepies from harbor freight the wires wernt long enough so didnt get the wired up yet so ill be making a trip to da lowes for some extra wire to makem work

 

Hooray! They work!!!



Put the switch in the shifter bezel



And i made me a cup holder out of a 3 inch pvc cap



Painted it black and used a hole saw to put it in the center console



Cherry bomb pro and a new cat!! I love the growl shes got now and its not too loud

 

Nice dude! Looking good

 

Keepin my fingers crossed! Might be gettin a D30 with 3.73's and an aw4 trans with an NP 231 transfer case for 500$!!!!!!!

 

almost like me! but I had to pay an extra 150 for the dana30 lol, just be sure you don't have to regear cause that will be a bit expensive

 

liking that wood grain dash!!!

 

The rears 3.55 right now. I plan on goin to 4.10s when i redo the lift to 4.5". I was gonna do it whilst i had the front end down doing the dana 30 swap but i think ill save it for later. (Dont want to do all my projects at once lol) so i think ill scavenge th jy for a
1. 3.73 rear for now.
2. snag the gears out of a 2.5 cherokee with stock 4.10s
3. Or get 3.55s for the front

Not sure when ill redo the lift and and 33s so i think ill go with option one if i can since im on 31s now and 3.73 with play nicer with my tires

 

I like it alot to!! I need to cleen up the interior really bad. (Spilled coffe on my passenger side floor bord cause the stock removable cup holder decided to break hence why i made a new one)

 

earlier in this thread i mentioned rough idle after my injector swap.. a couple weeks have passed and i realized that my intake and header were loose cause ing air to get in i followed tone tourqe sequence properly but like an idiot didn't go over them a second time to make sure they were all tight

so with that said i re tightened it all now she purrs like a kitten..

oh and my guy with my 4wd parts fell through.. he wanted to just sell the whole jeep and i don't have the space for it
ah well we'll se what the jy has for me..

 

thinking about redoing my rear lift with OME 3" rear springs and 1.5" shackle to net 4.5" of lifts and a 1.5" spacer up front for now. gonna look for my d30 at pick n pull probably in december when I've got more time off work

 

That would be cool but if it was me, I would save the money and try to get the parts for the 4wd swap before messing with the lift, after I do my swap I plan to get a new 4.5 lift but only after I get 4x4

 

Oh no im not gonna redo my lift untill the swap is done. Its more just jotting my thoughts down lol

 

Changed my oil to shell rottella 15 W40 with a K&N filter
Shes purring like a kitten

 

I used the same oil and love it she rides super nice around the lake, Also food for thought, what tires do you want in the end?

 

Im not sure about what brand but i think im gonna stick with all terrains since my wheeling isnt really even close to extreme yet but bfgs have been good so far