Project learning as I go.
#108
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: York PA/State College PA
Posts: 2,412
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Ok, now to a problem I'm hoping y'all can help me with. Cuz my shackle is so much bigger now, my tailpipe hits it and rattles. Should I trim the bolt (grade 8 cuz of the sleeve issue) or just bend the pipe away from the shackle? I know the pipe can be bent pretty easy.
#110
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: York PA/State College PA
Posts: 2,412
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by Chili-pepper-xj
Just read the entire thread...Looking good!
What bedliner did you use on your bumper end caps? Mine are faded like crazy
What bedliner did you use on your bumper end caps? Mine are faded like crazy
I used the duplicolor spray on bed liner. I would not recommend that though... It's starting to peel already. Now, I didn't sand or really prep the plastic. I just cleaned in with brake cleaner. If you sand it, and clean them properly, I'm sure you'll have better luck.
#112
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: York PA/State College PA
Posts: 2,412
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by DRUNKEN DIXIE
I would wait to the tailpipe is nice and hot and just bend it out of the way of the shackle.
#113
Member
Join Date: Apr 2011
Location: Duluth GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
#115
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: York PA/State College PA
Posts: 2,412
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by gaboy1911
A tip. get a piece of pipe and stick it in there when it is hot and pull
#116
Member
Join Date: Apr 2011
Location: Glo Pt,VA/Stewartstown,PA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
putting the spray on bedliner onto plastic doesn't always work. sometimes you have to get something to make it stick, and because my memory SUCKS, I can't remember what it's called...
#117
Member
Join Date: Apr 2011
Location: Duluth GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Last edited by gaboy1911; 08-18-2011 at 11:04 AM. Reason: added link
#118
Member
Join Date: Apr 2011
Location: Glo Pt,VA/Stewartstown,PA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
THAT'S IT! Thanks!
#119
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: York PA/State College PA
Posts: 2,412
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Oh cool, thanks guys, I haven't heard of that before.
As an update, I'm getting it aligned tomorrow morning. Then I'll schedule my tcase drop for next week. I'm also not driving it much till then. Don't wanna kill my u joints
As an update, I'm getting it aligned tomorrow morning. Then I'll schedule my tcase drop for next week. I'm also not driving it much till then. Don't wanna kill my u joints
#120
Member
Join Date: Mar 2009
Location: Idaho
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: I6 4.0 Liter