Project Goldie 2000 XJ
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 65
Likes: 0
From: Longview, WA
Year: 2000
Model: Cherokee
Engine: 4.0
So I havent been around much, Dad passed away and started my new job, so I had to deal with a lot over the pat few months. I have been doing some pretty awesome trail riding and few mud holes! I dont have a lot planned for the jeep as of right not except front and rear bumpers w/winch. My jeep is basically stock and so far I am nothing but happpy with her! She has performed amazing. So if you are in the Southern Washington area get ahold of me , so we can do some wheeling!
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 65
Likes: 0
From: Longview, WA
Year: 2000
Model: Cherokee
Engine: 4.0
I just cut the sheet metal in the front but the back I cut and folded. Then I covered the bare metal ends with some rhino lining spray. Turn out nice I think. If you want help pm me and I can hive you my number
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 65
Likes: 0
From: Longview, WA
Year: 2000
Model: Cherokee
Engine: 4.0
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 65
Likes: 0
From: Longview, WA
Year: 2000
Model: Cherokee
Engine: 4.0




Ok so I actually checked my build on a computer and noticed none of my pics are showing up! So here are the pictures I have uploaded recently! Thanks for checking it out!
Seasoned Member
Joined: Dec 2010
Posts: 402
Likes: 2
From: Charlotte/Raleigh, NC
Year: 1999
Model: Cherokee
Engine: 4.0 MPI
Well first off, thanks for your service! And second thanks for trimming your fenders, I've been debating cutting them on mine but hadn't it seen to our color yet
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 65
Likes: 0
From: Longview, WA
Year: 2000
Model: Cherokee
Engine: 4.0
No problem I debated it for a long time then One day said screw it, love how it turned out and with my little 3" lift it helps my 33" tires fit perfect
Seasoned Member
Joined: Dec 2010
Posts: 402
Likes: 2
From: Charlotte/Raleigh, NC
Year: 1999
Model: Cherokee
Engine: 4.0 MPI
Originally Posted by 2000xjgoldie
No problem I debated it for a long time then One day said screw it, love how it turned out and with my little 3" lift it helps my 33" tires fit perfect
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 65
Likes: 0
From: Longview, WA
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by 99Classic
Now you've really got me considering it. I'm at about 3.5" right now and I'd love to run 33s. I'm just a little nervous about permanent body mods.






