project flipper!!
#16
CF Veteran
Join Date: Oct 2011
Location: South Mills, NC
Posts: 1,812
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Originally Posted by bmikes
Roll cage today!! here's the plans!
#17
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Me and my buddy are making it together. He's got a tube bender and some other equipment at his shop so we're working there
#18
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Day two of the cage build! Yesterday we.got all the pieces cut out and i bent all the ones that needed to.be bent. So now we're tacking it all in and making little adjustments, then we'll finish burnin her in
#19
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Well... Im frustrated :/ we got the back end of the cage done. And i really like how the back end of the cage turned out. But the front we were having problems getting stuff lined up, my bends were right a bunch a stuff wasn't right. So we decided to quit for the day and get back at it some other time.. But there's like $180 worth of dom that's wasted :/
#20
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Alright, well i got my tail lights all wired up again! The last two days before work i took apart the wiring harness that runs to the back and go rid of all the wires i don't need anymore, like for the wiper motor and stuff. And when i chopped the top i accidently cut the wires that lead to the passenger side tail light so i had to splice those wires in again. But instead of running them right across the 'tailgate' area, i sliced them further back in the wiring where the back seat used to be!
I got a rear view mirror on today, (since i don't even know where mine want when i rolled it) and then went to the jy and got a drivers mirror!
So now with my lights and mirrors im finally street legal again! so i drove her to work today
i got to work about 30 minutes early so i also sliced in a little lightbulb to illuminate my rear license plate at night
Ps, this little light is definitely not permanent, its just for a couple days. But for like 15 minutes of work i don't think its half bad if it keeps me from getting pulled over
I got a rear view mirror on today, (since i don't even know where mine want when i rolled it) and then went to the jy and got a drivers mirror!
So now with my lights and mirrors im finally street legal again! so i drove her to work today
i got to work about 30 minutes early so i also sliced in a little lightbulb to illuminate my rear license plate at night
Ps, this little light is definitely not permanent, its just for a couple days. But for like 15 minutes of work i don't think its half bad if it keeps me from getting pulled over
#23
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Originally Posted by ccooper1234
You planning on bed lining the interior
#24
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
I got a little done today, welded the pad ( 'c' pillar) feet to the floor. Tomorrow ill work on the frame stiffeners and tying those feet to it
#25
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Oh, and just a tip for anyone reading, the fill plug on the ax-15 is a 24mm. it took me forever to find the right wrench/socket for it. I ended up using a 24mm socket, cause i don't have that size wrench :/
#26
Newbie
Join Date: Jul 2012
Location: Santa Rosa California
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L highoutput
Hey so if i wer to build my own cage someday. wear do u mount it and weld it?? I never really under stood how to mount a cage to Ur body!?!?
#27
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Hey guys, so I've been slacking on posting new updates in.here, but.here's some pictures of the most recent work i got done today!
Tryin to weld 18ga sheet metal onto the body metal sucks!!
These are my sheet metal benders. I tried harbor fright ones but they can't.bend 18 ga... Maybe 24! but anyways, they are old horse shoe nail clippers! I ground down the point where they.came together and welded in two pieces of 3/8 stock i had around. They work real good!
Tryin to weld 18ga sheet metal onto the body metal sucks!!
These are my sheet metal benders. I tried harbor fright ones but they can't.bend 18 ga... Maybe 24! but anyways, they are old horse shoe nail clippers! I ground down the point where they.came together and welded in two pieces of 3/8 stock i had around. They work real good!
#29
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
No, that bar is all the way.behind the back seat. One i get the money to buy the seats ill fit them in and make a bar for.the harnesses