project flipper!!
#52
Member
Join Date: Apr 2012
Location: Jacksonville, Fl
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Do you think the little bit of movement from flexing and wheeling may make those windows pop out? I know it SHOULD be pretty stiff after the cage.
Why did you go with crappy foam on the floor and not weld a plate along the bottom seam? It seams you did to much nice metal work to just skimp out on the floor seam.
All in all this is a nice build and its coming together nicely.
Why did you go with crappy foam on the floor and not weld a plate along the bottom seam? It seams you did to much nice metal work to just skimp out on the floor seam.
All in all this is a nice build and its coming together nicely.
#53
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Wow thanks for the comments guys! its refreshing to see someone actually look at this first off, I just did that foam there to be a sound barrier and make it more water tight, I plan on puttin sheet metal to cover that area where the bed slants downwards. And then the windows, I left about an 1/8th in gap between my cut outs and the tubing frame, so.hopefully if it does flex, the rubber seal will absorb it. And if it does.bust one, hopefully its not raining too.hard! but I'll have learned a lesson and I'll just redo it
#56
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Originally Posted by odgreen89on35s
I may be a tard but what part of oregon you from?
Originally Posted by knever3
Cool build. If they made a nice removable top I would rather drive a XJ 2 door than a Wrangler. I can't wait to see when you get more done.
#58
CF Veteran
Join Date: Aug 2012
Location: oregon
Posts: 1,592
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
what's your plan for tie down attachment points in the bed? I know that's kinda early question to ask. Also everything looks to be coming together very nicely. Good job.
#59
Senior Member
Thread Starter
Join Date: Mar 2012
Location: gresham
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Originally Posted by stang65
what's your plan for tie down attachment points in the bed? I know that's kinda early question to ask. Also everything looks to be coming together very nicely. Good job.