I am starting a build on my 1990 jeep cherokee limited. I got this bad boy for $950 bucks and i'll probably double that in parts. It is an addiction, akin to crack cocaine. Here's a few things i have gotten done so far. and it is a budget build for now.

general maintenance, alternator, power steering, valve cover gasket
3" rough country lift with add a leaf.

I plan on getting 31x10.5 mudclaw tires with 15x8 rims.

 

ill be watching this. Ill be doing similar, excited to see what goes on!

 

It's awesome! I am deciding between the sye or the wheels first. I got the lift in a little while ago. this forum awesome and full of people that will help with anything! This is a little of the front end

 

The rear. I did the add a leaf. If you have the cash just do the whole new leaf set.

 

Front end again.

 

And a before and after the lift. It's amazing what new springs will do for a 20 year old jeep! I have some vibrations coming from one of the drive shafts. I also had to rebuild the front one. I hate needle bearings.... one hour, an *** ton of grease and a few beers is what put it back together. Im going to take the front one off and see if the noise goes away. I shimmed out the transfer case, but i dont like the way it sits. Ill just cough up the cash for a sye and a driveshaft. Or should i say, an after then before.

 

I got some rock lights installed for trailing at night. They help out alot more than i realized!

 

More to come soon

 

loving those rock lights how much for a asset and were they a PITA to put in?

 

Sorry stretch, I just got your post. No, they were easy. One of the holes already existed. They bolted right in. They were 20 bucks from Walmart. It came with everything you need.

 

sounds like a lucky find man haha

 

I bet they have them at a Walmart near you, or an autozone

 

I havent posted on here in a while and ive done alot. ill add my photobucket link here

 

http://s1349.photobucket.com/user/St...bed/slideshow/