Project - "Finally Ours"
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
finally decided to trim my front fenders so i would stop crumpling them...just took a little off so it wouldn't look horrible due to the tiny tires will trim more later when i get bigger tires...
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
started painting the jcr quarter guards going about it slowly since i dont have the lights yet and wont for a while cause money is tight....went through the wiring in the rear of the jeep looking for my issue found nothing so it just leaves ripping the dash out which will be done when my gf gets her xj back and ill drive her escort 
....
but other than that been making plans for my baby and doing research on my np241or swap and JB Conversions has the 32spline 1310 yokes i need x2 and the 4wd selector switch if i want my gauge cluster to tell me im in 4wd and apparently i can use an automatic front driveshaft in the rear and be perfectly fine will just need to figure out what ill have to use when i 5-speed swap over the winter...
....but other than that been making plans for my baby and doing research on my np241or swap and JB Conversions has the 32spline 1310 yokes i need x2 and the 4wd selector switch if i want my gauge cluster to tell me im in 4wd and apparently i can use an automatic front driveshaft in the rear and be perfectly fine will just need to figure out what ill have to use when i 5-speed swap over the winter...
Last edited by mcguyver_xj; Jul 15, 2012 at 05:17 PM.
Newbie
Joined: Feb 2012
Posts: 4
Likes: 0
From: Spiritwood, SK. Canada
Year: 1986
Model: Cherokee
Engine: Camaro 3.4 V6
That's a nice lookin XJ!! I just bought myself a '99 Classic with the NP242 tcase. I've been considering swapping my 4.5" lift from my '86 onto the new one, but I have concerns regarding the rear ds. Did you have to hack n' tap yours and/or put a different rear ds under it?
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
That's a nice lookin XJ!! I just bought myself a '99 Classic with the NP242 tcase. I've been considering swapping my 4.5" lift from my '86 onto the new one, but I have concerns regarding the rear ds. Did you have to hack n' tap yours and/or put a different rear ds under it?
Thread Starter
Banned
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
went wheeling today and lets just say i love rock crawling met some people who showed us a new private trail that was real technical and i loved it...but after it all my jeep would buck and sputter after hot startup when i stopped and turned it off pulled cel codes and i got P1698, P0705, & P1694 got to figure that stuff out now...
CF Veteran
Joined: Mar 2009
Posts: 2,287
Likes: 0
From: Westfield, MA
Year: 1999.
Model: Cherokee
Engine: 4.0, I6
went wheeling today and lets just say i love rock crawling met some people who showed us a new private trail that was real technical and i loved it...but after it all my jeep would buck and sputter after hot startup when i stopped and turned it off pulled cel codes and i got P1698, P0705, & P1694 got to figure that stuff out now...