Project 90 mj short bed
#1
CF Veteran
Thread Starter
Join Date: Apr 2010
Location: fallon, nv
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Project 90 mj short bed
ok so i picked up a bone stock 1990 mj comanche short bed 4x4 4.0l 5-speed the other day for $800, truck came with almost $10,000 dollars worth of reciepts since this guy bought it 15 years ago, couldnt believe my luck, only draw back was it had a little of front body damage, so i started off just spraying two stripes down the hood, painted the wheels, ripped off the fron bumper and did a ton of cutting to get it ready for the 31x10.5 and front winch bumper i have for it, then i did a full tune up all filters and fluids bumper to bumper, swapped plugs and wires, new wipers, tinted the camper shells windows, and thats all just the past two days, lots more to come
#3
CF Veteran
Thread Starter
Join Date: Apr 2010
Location: fallon, nv
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
sorry was in the middle of posting them here is my build link to the pix
https://www.cherokeeforum.com/member...4-5-speed-4-0/
https://www.cherokeeforum.com/member...4-5-speed-4-0/
#5
CF Veteran
Thread Starter
Join Date: Apr 2010
Location: fallon, nv
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
ahaha i love it for work though cuz it locks and i got all my tools and **** back there, so anyways on my way to my buddys house i pulled a u turn in the wrong spot and sunk 3 wheels all the way to the frame, only one was on the street, kicked it in 4 wheel and that dana 44 trac lock kicked in, man it was like butta, my old open diff xj woulda been sitting there spinning tires...
#7
CF Veteran
Thread Starter
Join Date: Apr 2010
Location: fallon, nv
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
got new 31x10.5 a/t's for her today mounted and balanced for $95 bux at wal-mart, must say i trimmed just enough that i have no rub SWEEETTT, gunna start taking measurments in the morning to start on the custom winch bumper, pix to come soon
Trending Topics
#9
Seasoned Member
Join Date: Nov 2009
Location: Browns Valley/Grass Valley, CA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 98 4.0 swap
I cant wait to see some good wheelin pics. get a cherokee rear axle and it'll lift rear like 2 1/2" or so. since your mj should be sprung under rear.
#12
CF Veteran
Thread Starter
Join Date: Apr 2010
Location: fallon, nv
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
yeah i know but with it being winter time and all my tools r back there it works for now, and im having issues uploading pix to the page, technology hates me lol, oh and im having a small issue with my dana 30 vac disco, it wont unlock unless i manually pull the vac disco off for a second then its fine, thinking its the actuator itself, any ideas?
#13
Seasoned Member
Join Date: Nov 2009
Location: Browns Valley/Grass Valley, CA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 98 4.0 swap
oh right that mj has a 44. well get a 44 from any rear sprung over rear and it will lift lol. replacing with a cherokee d35 would be wrong.
#15
Seasoned Member
Join Date: Nov 2009
Location: Browns Valley/Grass Valley, CA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 98 4.0 swap
Yeah certain year and model chevys amc jeeps and fords and dodges out of like the 70's through now. i think dodge 1500's from the 90s run those a lot though. be first place i look and the fron axle in them is also a d44 and its already coild 4link be a good front swap too. although i dont know if either of those are bolt in.