Couldn't decide on shocks..but check these out I got for 20 bucks

above or below bumper?

hey man, sucks that you bought a new tranny just to find out it was fine...i woulda thought it was something electrical first...i havent really heard of a bad jeep tranny. and awesome brake lights! i put two strips of leds on the inside of each window, heres a pic. also i got those type of fog lights, put them on, and they said 55 watts....my 35 watt walmart lights were brighter. and in 2 weeks the black painted screws and bolts are completely rusted...waste of $20 haha.

Ya man,, those lights are awesome.!!I did a little bodywork and painting this morning..I took off the trim ( I was already missing door pcs.)

I sanded all the old glue and dirt off
sry thumbs in the way
masked it all off rattle can to the rescue!!

That's rain droplets!! Blahh

I know this is a Cherokee build forum but look at the size of
this cj !!!!!!!

my bet is that with those wheels that cj isn't off roading much

I know right,,, he should have alot more rubber on those rims

Just picked up an old school cb radio for 25 cents at a garage sale
and the I made a waterproof pa system speaker housing with sheet metal and electric tape and drywall screws (the cone of the speaker is pushed in)

mounted it under my master cylinder

sounds great! And waterproof!! For now

Used a household multi-switch to control
aux fan,fog lights,

Today I started to fab up some rear taillight covers..... Leave your comments on if you like em or not.

almostfinished

i dont think i like those taillight covers very much haha. i just painted the flairs and bumpers on mine...took alittle longer then i thought...but i did 2 coats primer...2 coats color....2 coats clear coat...hopefully it wont come off anytime soon.
also mount the foglights above the bumper...if you do any offroading youll agree with me....i had some cheapo walmarts mounted under bumper cause i liked the way it looked...didnt last long haha. filled up with sand and water....

I'm gonna paint em gloss black and I think theyll look good

I wanted to ask if there is any way to put rear disk brakes instead
of drum brakes on my jeep? J/w

Yes, if you have a Dana 35 rear the disks out of a ZJ will bolt right in, you need everything from thr backing plate out and a new proportioning valve for the ZJ. If you have the 8.25 its the same deal you can use the ZJ ones or you can use the ones from a liberty as well.

So,I've been really busy workin this thing back into shape, new rough country RCX nitro shocks, with shiny red boots and everything,