My "To-Do" list for my '88
#1
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
My "To-Do" list for my '88
This is a list of things that I want to do to my Jeep. Many of these ideas and suggestions were sparked here on CherokeeForum. Take a look and feel free to give me your opinion.
- Remove A/C condenser coil ---- Completed 02/28/2012
- Remove all A/C lines up to firewall ---- Completed 02/28/2012
- Remove A/C compressor and relocate Alternator to A/C compressor’s former location
====== Will require new serpentine belt (Napa Part #: NBH 25060760)
>>>>>>>>> <http://www.napaautoparts.com/Catalog...760_0117427804>
- Heavy duty Transmission cooler ---- Completed 02/29/2012
- Convert to ‘91+ “Open Style” cooling system with overflow tank and capped radiator ---- Completed 02/29/2012
- Manual override switch for electric/auxiliary radiator fan(s) ---- Completed 07/15/12
- High-flow catalytic convertor ---- Completed 03/01/2012
- ZJ V8 steering tierod ---- Completed 11/13/2011 (IRO OTK steering 05/09/13)
- Dodge Dakota/Durango steering box
- New engine, 4.0L HO or 4.7L Stroker ---- Stroker, Completed April '13
- Additional 1”-1.5” lift ---- Completed 03/15/2012
- Hack N' Tap SYE ---- Completed 03/15/2012
- Sound bar, front ---- Completed 08/25/2012
- Remove carpet, Herculiner floor pans
- Doorless mod ---- Completed 07/15/2012
- Lower shock mount relocation
>>>>>>>>> <http://www.jeepforum.com/forum/f11/8...5/#post8663625>
- Chrysler 8.25 rear axle ---- Completed May '13
====== Install disc-brakes from ZJ rear Dana 35 onto Chrysler 8.25 ---- Completed May '13
>>>>>>>>> <https://www.cherokeeforum.com/f51/re...-8-25-a-57807/>
>>>>>>>>> <http://www.jeepforum.com/forum/f11/zj-rear-disc-conversion-8-25-write-up-whole-truth-607435/>
====== Install Lock-Right “Lunch-Box” locker ---- Unless Aussie comes out with a 27-spline version...
>>>>>>>>> <http://www.aussielocker.com/index.ph...-xd-58229.html>
- Upgrade HP Dana 30 with 5-760x U-joints shafts ---- Completed May '13
====== Install Aussie “Lunch-Box” locker
>>>>>>>>> <http://www.aussielocker.com/index.ph...-xd-13027.html>
- Weld axle tubes to differential housing
- Lawn edging fender flares
>>>>>>>>> <http://i89.photobucket.com/albums/k2...2/GEDC1664.jpg>
"Overkill is just an understatement."
Things to do to my ’88 Jeep
- Remove all A/C lines up to firewall ---- Completed 02/28/2012
- Remove A/C compressor and relocate Alternator to A/C compressor’s former location
====== Will require new serpentine belt (Napa Part #: NBH 25060760)
>>>>>>>>> <http://www.napaautoparts.com/Catalog...760_0117427804>
- Heavy duty Transmission cooler ---- Completed 02/29/2012
- Convert to ‘91+ “Open Style” cooling system with overflow tank and capped radiator ---- Completed 02/29/2012
- Manual override switch for electric/auxiliary radiator fan(s) ---- Completed 07/15/12
- High-flow catalytic convertor ---- Completed 03/01/2012
- ZJ V8 steering tierod ---- Completed 11/13/2011 (IRO OTK steering 05/09/13)
- Dodge Dakota/Durango steering box
- New engine, 4.0L HO or 4.7L Stroker ---- Stroker, Completed April '13
- Additional 1”-1.5” lift ---- Completed 03/15/2012
- Hack N' Tap SYE ---- Completed 03/15/2012
- Sound bar, front ---- Completed 08/25/2012
- Remove carpet, Herculiner floor pans
- Doorless mod ---- Completed 07/15/2012
- Lower shock mount relocation
>>>>>>>>> <http://www.jeepforum.com/forum/f11/8...5/#post8663625>
- Chrysler 8.25 rear axle ---- Completed May '13
====== Install disc-brakes from ZJ rear Dana 35 onto Chrysler 8.25 ---- Completed May '13
>>>>>>>>> <https://www.cherokeeforum.com/f51/re...-8-25-a-57807/>
>>>>>>>>> <http://www.jeepforum.com/forum/f11/zj-rear-disc-conversion-8-25-write-up-whole-truth-607435/>
====== Install Lock-Right “Lunch-Box” locker ---- Unless Aussie comes out with a 27-spline version...
>>>>>>>>> <http://www.aussielocker.com/index.ph...-xd-58229.html>
- Upgrade HP Dana 30 with 5-760x U-joints shafts ---- Completed May '13
====== Install Aussie “Lunch-Box” locker
>>>>>>>>> <http://www.aussielocker.com/index.ph...-xd-13027.html>
- Weld axle tubes to differential housing
- Lawn edging fender flares
>>>>>>>>> <http://i89.photobucket.com/albums/k2...2/GEDC1664.jpg>
"Overkill is just an understatement."
Last edited by onlyinajeep726; 08-12-2013 at 07:23 AM.
#3
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
That was the plan lol. I just got to pick up my sound bar from my parents' house and figure out where I'm going to relocate and/or rewire my power window switches.
#5
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Hopefully getting a B&M transmission super cooler from the fat man in the red suit.
#6
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
My next project. https://www.cherokeeforum.com/f51/ho...si-lock-78838/
*Edit: Don't need to do home posi now... read post below.
*Edit: Don't need to do home posi now... read post below.
Last edited by onlyinajeep726; 12-31-2011 at 06:11 PM.
#7
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Went to the local junk yard today. They were doing a 50% sale for New Years. Found and acquired a HP D30 (non-CAD) and a 27spl C8.25 both with 4:10's. Couldn't be happier. A nice upgrade from the D30/D35/3:55's I have now. Should be able to push those 31's a lot easier now!
Also, got that B&M transmission super cooler for Xmas. 3 words: Best... Xmas... ever.
Also, got that B&M transmission super cooler for Xmas. 3 words: Best... Xmas... ever.
Last edited by onlyinajeep726; 01-09-2012 at 02:23 PM.
Trending Topics
#9
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
#12
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Yes, it was the last XJ I found. 2.5L, 4 cylinder with a 5-speed manual. Was all the way in the back...
Yea, I know. Going to clean them up first and put those disc brakes of yours on the rear axle. Might try to find a locker soon...
Yea, I know. Going to clean them up first and put those disc brakes of yours on the rear axle. Might try to find a locker soon...
#14
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
#15
Senior Member
Join Date: Oct 2011
Location: Raleigh,NC
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L HO
Dude i saw you taking out the front! haha. The flat black one in the back...damn good find on the 4.10s. I was in a dark blue carhartt jacket with a lil blue toolbox...was hunting for some tail lights after cracking mine on my recent wheeling trip.