My 94 XJ build "Project Junk"
#31
Member
Thread Starter
Join Date: Jun 2009
Location: West Jordan Utah
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Lol, thanks!
#32
Member
Thread Starter
Join Date: Jun 2009
Location: West Jordan Utah
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Painted my tail lights the other day. I bought some Translucent Candy Apple Red paint from Testors it cost me about $6 bucks.
Cut out the little reverse light with a razor blade.
And after a couple good coats.
Cut out the little reverse light with a razor blade.
And after a couple good coats.
#35
Member
Thread Starter
Join Date: Jun 2009
Location: West Jordan Utah
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
#39
Member
Join Date: Nov 2009
Location: Provo UT
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89 2 door
Model: Cherokee
Engine: 4.0
i love the build and am doing something similar and hesitate to ask how much was your 35spline arb 4.88 deal for your 44? break it to me easy. cause that sounds like a dream
#40
Member
Thread Starter
Join Date: Jun 2009
Location: West Jordan Utah
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
About $175 for the G2 4.89s
About $850 for the ARB plus the pump (mine was free with purchase)
About $280 for the 35 spline 10 Factory shafts
About $120 for the install kit.
I paid close to $1500 for everything plus the cost of the front.
This is retail for all the parts I installed it myself when I worked for 4 Wheel Parts, so that saved me some money.
My shafts are the same size as a Rear Rock Jock 60 shaft I measured them myself.
Last edited by jrw7072009; 03-27-2011 at 01:56 AM.
#43
Member
Thread Starter
Join Date: Jun 2009
Location: West Jordan Utah
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Well with the help of a good buddy of mine, I got my rear bumper all finished. Had the help of a very experienced welder and metal worker and I learned more then a few new tricks.
I got the bumper all painted today and put on, here is how it turned out.
I got the bumper all painted today and put on, here is how it turned out.
#45
Member
Thread Starter
Join Date: Jun 2009
Location: West Jordan Utah
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0