Little Blue Jeep build: Abridged.
09-26-2016, 04:02 PM
#31
Junior Member
Thread Starter
Join Date: Dec 2015
Location: Murrells Inlet,SC/Smithfield,VA
Posts: 60
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Update: 9/26/16
It's been awhile and not much with the xj has changed. I got a promotion at work, so I've been super busy with that.
All I've been able to get accomplished is the rear locker installed, brake lines, brakes, and e-brake cables. As of now that's all that's going into the rear axle. I also moved at the beginning of September and the xj is in its new resting spot, I pulled the front axle, fixed the axle side track bar mount and painted the center and tubes. Once I get the axle back in and pull the knuckles off to do the ball joints and the shafts out to do the ujoints and tube seals I'll go ahead and paint the knuckles and the C's. Until then here are a few pictures.
Getting her onto the trailer sucked, the zj didn't like pulling her either.
The new shop is 20x40 with power and a working air compressor, I just have to plumb everything for it, then I can invest in some air tools.
It's been awhile and not much with the xj has changed. I got a promotion at work, so I've been super busy with that.
All I've been able to get accomplished is the rear locker installed, brake lines, brakes, and e-brake cables. As of now that's all that's going into the rear axle. I also moved at the beginning of September and the xj is in its new resting spot, I pulled the front axle, fixed the axle side track bar mount and painted the center and tubes. Once I get the axle back in and pull the knuckles off to do the ball joints and the shafts out to do the ujoints and tube seals I'll go ahead and paint the knuckles and the C's. Until then here are a few pictures.
Getting her onto the trailer sucked, the zj didn't like pulling her either.
The new shop is 20x40 with power and a working air compressor, I just have to plumb everything for it, then I can invest in some air tools.
