"Goldrush"
#16
Junior Member
Thread Starter
Join Date: Nov 2012
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
got some more pics of the rockers and front bumper...
and burned in some 1" .250 wall dom for the RK long arm brackets. opted to not use the smaller dom and spacers that came in the kit..
should be a bit more beefy for not welding on the brackets...
and burned in some 1" .250 wall dom for the RK long arm brackets. opted to not use the smaller dom and spacers that came in the kit..
should be a bit more beefy for not welding on the brackets...
Last edited by Jtpxjc; 01-23-2013 at 11:32 PM.
#19
Junior Member
Thread Starter
Join Date: Nov 2012
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
haha.. i've definitely dropped some coin, but i'm still within my budget i set when i started.. doing all the fab and installation myself definite helps on the bottom line.
#20
Junior Member
Thread Starter
Join Date: Nov 2012
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
Got the rest of the framerails plated up to the bumper brackets.. and finished up the front bumper this weekend as well..
and tried on some 37x13.5's hoping to run this size eventually.... when i get some non terd axles under it..
and tried on some 37x13.5's hoping to run this size eventually.... when i get some non terd axles under it..
#27
Junior Member
I'm also interested in how you have the winch mounted to the factory x-member. Picture of that would be great. Looks like the vertical plate part of the bumper butts flat up against the x-member. The factory x-member will be sandwiched between the winch and winch plate on the bumper?
Awesome build so far.
Awesome build so far.
#28
☠ CF Sheriff ☠
I'm also interested in how you have the winch mounted to the factory x-member. Picture of that would be great. Looks like the vertical plate part of the bumper butts flat up against the x-member. The factory x-member will be sandwiched between the winch and winch plate on the bumper?
Awesome build so far.
Awesome build so far.
I'd like to see mounting photos too
#29
Junior Member
Thread Starter
Join Date: Nov 2012
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
I'm working on the axles at the moment... i'll be mounting the winch in the next couple days and i'll snap some pics of how it goes in..