DualPurposeXJ build
#32
Member
Thread Starter
Join Date: Dec 2011
Location: Menifee, CA
Posts: 149
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
slowly making progress, extended the passenger side frame plates
and some parts i've gotten
brown dog motor mounts
tube flanges for my engine cage
Dzus fasteners for the dash
while im waiting to decide on what to do about the engine cage i decided to start on the front bumper, i started by cutting two 2" pieces of 1.75" tube and then cut out a couple of pieces of 1/8" plate with a hole saw to cap the tube
then i welded those on the frame and then cut and notched a couple of 9" tubes of 1.75" tubing and welded some tube flanges on them then tacked the tubes in place
it was definitely time for some new motor mounts, both sleeves slid right out when i unbolted them
and some parts i've gotten
brown dog motor mounts
tube flanges for my engine cage
Dzus fasteners for the dash
while im waiting to decide on what to do about the engine cage i decided to start on the front bumper, i started by cutting two 2" pieces of 1.75" tube and then cut out a couple of pieces of 1/8" plate with a hole saw to cap the tube
then i welded those on the frame and then cut and notched a couple of 9" tubes of 1.75" tubing and welded some tube flanges on them then tacked the tubes in place
it was definitely time for some new motor mounts, both sleeves slid right out when i unbolted them
#33
Member
Thread Starter
Join Date: Dec 2011
Location: Menifee, CA
Posts: 149
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
i changed the bumper a little bit, i made it longer and added a tube going across and i might plate that tube to the crossmember
here's what i've come up with so far for my front bumper, i'm trying to do something a little different than the traditional tube bumper
i bent up the 2 main tubes for the engine cage
mocked up
here's what i've come up with so far for my front bumper, i'm trying to do something a little different than the traditional tube bumper
i bent up the 2 main tubes for the engine cage
mocked up
#34
Member
Thread Starter
Join Date: Dec 2011
Location: Menifee, CA
Posts: 149
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
i hate to do this but i'm parting out the jeep, might be picking up another project tomorrow
http://naxja.org/forum/showthread.php?t=1109830
http://naxja.org/forum/showthread.php?t=1109830
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)