Suspension overhaul mainly,.....but I've had this guy for years and done a crapload of things. First things first I had to pull the old garbage leafs off,....a lot of cursing later ,...drivers rear done

 

Moving on to the passenger rear,...things got exiting. Broke the front leaf bolt off,..had to cut the dam spring in two than chop up the end to get up in to the bolt! Ugh! Than i cut a hole right below the nut so I could knock it off with a punch.

 

Cut leaf

 

Offending bolt

 

By the way,..I'm installing a 'budget boost' system by Quadratech which is basically extended shackles and coil spacers. Also I'm adding new leaf springs new coils and all new bushings for front and rear sway bars.

 

Sway bar links replaced,...all poly bushings. If you're jeep is old and rusty like mine you might as well buy new sway bar links if you are replacing bushings. Both mine broke while trying to remove the nuts. They were like 12 bucks each not too bad

 

Broken and rusted thin

 

So I finished up the front end with all new coils, shocks and poly bushings for the sway bar and links

 

I ended up with about a 3" lift after its all said and done,...Chunk is lookin sweet ! Ready for mud!

 

Woohoo!

 

I also got rid of that old junky magnet antenna and replaced it with this sweet side mount and a 10' steel whip

 

I got more travel that I thought with this system !