View Poll Results: Should I have added more detail?
Looks good
1
100.00%
Needs work
0
0%
I hate it
0
0%
Voters: 1. You may not vote on this poll
Chunk the Cherokee ...1994
03-19-2016, 10:32 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
Chunk the Cherokee ...1994
Suspension overhaul mainly,.....but I've had this guy for years and done a crapload of things. First things first I had to pull the old garbage leafs off,....a lot of cursing later ,...drivers rear done
03-19-2016, 10:55 AM
#2
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
Moving on to the passenger rear,...things got exiting. Broke the front leaf bolt off,..had to cut the dam spring in two than chop up the end to get up in to the bolt! Ugh! Than i cut a hole right below the nut so I could knock it off with a punch.
03-19-2016, 11:06 AM
#5
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
By the way,..I'm installing a 'budget boost' system by Quadratech which is basically extended shackles and coil spacers. Also I'm adding new leaf springs new coils and all new bushings for front and rear sway bars.
03-19-2016, 12:58 PM
#6
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
Sway bar links replaced,...all poly bushings. If you're jeep is old and rusty like mine you might as well buy new sway bar links if you are replacing bushings. Both mine broke while trying to remove the nuts. They were like 12 bucks each not too bad
Trending Topics
03-26-2016, 12:30 PM
#8
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
So I finished up the front end with all new coils, shocks and poly bushings for the sway bar and links 
03-26-2016, 12:32 PM
#9
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
I ended up with about a 3" lift after its all said and done,...Chunk is lookin sweet ! Ready for mud!
03-26-2016, 12:35 PM
#11
Junior Member
Thread Starter
Join Date: Mar 2016
Location: Morgantown, West Virginia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Inline 6 High Output
I also got rid of that old junky magnet antenna and replaced it with this sweet side mount and a 10' steel whip
Thread
Thread Starter
Forum
Replies
Last Post
volaticus
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
04-06-2016 08:59 PM
headRUSH
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
03-18-2016 09:37 AM
DualWieldViking
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-16-2016 09:20 PM
Pelagius
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
03-15-2016 09:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)