Big Ol Red Build
06-13-2012, 04:50 PM
#1
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
98 Classic Flame Red
I've been lurking on here for a while now and decided that i have enough done (so far) to start a build thread on my jeep. I've had it for about a month now and im loving it.
when i first brought her home. My brothers 2wd creepin on the right. Apologize for the less than great pictures.
when i first brought her home. My brothers 2wd creepin on the right. Apologize for the less than great pictures.
Last edited by WildBlueXJ; 08-08-2012 at 02:34 PM.
06-13-2012, 04:55 PM
#2
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
First thing that did was had to get the CEL off so i ran the codes and got the p0700 and p0705 codes. So after reading many posts on here about the codes, i decided it was the neutral safety switch. So i went ahead and opted for the cleaning the one i have, as apposed to the 250$ new switch. So after taking it off (sorry no real pics of the process) i cleaned the inside which was bogged down with old grease and gunk. put it back on and bam the check engine light was off.
Last edited by WildBlueXJ; 06-13-2012 at 05:05 PM.
06-13-2012, 05:00 PM
#3
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Next on the list was to deal with the driver side window not being able to roll down, which i hated. So a quick trip to the pick n pull i had a new window motor for 15$
06-13-2012, 05:14 PM
#6
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Next was the best part of the whole process. Went to the pick n pull for shyts and giggles and found me a whole suspension lift and tires that were pretty much brand new.
a little before and after action.
a little before and after action.
Trending Topics
06-13-2012, 05:18 PM
#9
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Selling the green bean (taurus) soon so can get some money. Plan on getting jcr front bumper, adj track bar, and a bigger tie rod. and other stuff i cant think of.
06-13-2012, 10:06 PM
#12
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
because i went through a puddle i was told was only sapposed a foot deep and ended up door deep in water and putting like a 4 degree bend in it.
06-14-2012, 09:30 AM
#14
Member
Join Date: Aug 2010
Location: Trenton, MI
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 I6
07-12-2012, 11:49 AM
#15
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Wilmington, NC
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Been a while since i updated but i got some stuff in the mix. put on the dynomax super turbo kit got a little ruble to it not too loud, cant beat it for the price though. Ordered a jcr front pre runner bumper as well, also got a deal on a set of 5 17 inch moabs and 255x75x17 bfg mud terrain km,s. 250 miles and still got the nipples on them.