Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

The Baconator

Thread Tools
 
Search this Thread
 
Old Jul 3, 2013 | 10:22 AM
  #46  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default New and Improved Baconator

On the Road again :-)
Attached Thumbnails The Baconator-baconator-33s-fj.jpg  
Reply
Old Jul 4, 2013 | 06:10 PM
  #47  
cliffdiver96's Avatar
Member
 
Joined: Jan 2011
Posts: 160
Likes: 0
From: Trumbull, Ct
Year: 1994
Model: Cherokee
Engine: 4.0
Default

Looks sick man, any future plans? And out of curiosity-why the name baconator?
Reply
Old Jul 4, 2013 | 06:20 PM
  #48  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Originally Posted by cliffdiver96
Looks sick man, any future plans? And out of curiosity-why the name baconator?
Thanks
Nickname is bacon and daughter is bacon bit so named jeep Baconator
Reply
Old Jul 4, 2013 | 06:25 PM
  #49  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Baconator wrecked on July 3rd
Driveshaft pulled from transfer case
Popped 33s
Smashed door
Hole in rear door
Snapped leaf spring

Waiting on insurance now
Guess time for upgrades even though i just finished in time to wheel July 4
Attached Thumbnails The Baconator-forumrunner_20130704_182133.jpg   The Baconator-forumrunner_20130704_182152.jpg   The Baconator-forumrunner_20130704_182205.jpg   The Baconator-forumrunner_20130704_182226.jpg   The Baconator-forumrunner_20130704_182244.jpg  

The Baconator-forumrunner_20130704_182305.jpg  
Reply
Old Jul 4, 2013 | 06:28 PM
  #50  
rmoore1031's Avatar
CF Veteran
 
Joined: Aug 2012
Posts: 1,281
Likes: 2
From: Bentonville, AR
Year: 1990
Model: Cherokee
Engine: I6 4.0
Default

^ Everyone alright? The Baconator can be rebuilt. Hope you are alright.
Reply
Old Jul 4, 2013 | 06:44 PM
  #51  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Originally Posted by rmoore1031
^ Everyone alright? The Baconator can be rebuilt. Hope you are alright.
Everyones alright
Bent his frame on his truck
Looking at going to a 6-7" overall lift and locker in rear with money.
Reply
Old Jul 13, 2013 | 08:25 PM
  #52  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Realized that leaf on driver side also twisted due to u-bolts being broken. The front Lower Control Arm bracket was bent due to impact. Passenger leaf was pushed through floor.
Attached Thumbnails The Baconator-img_20130713_141936_667.jpg   The Baconator-img_20130713_141945_972.jpg   The Baconator-img_20130713_141954_170.jpg   The Baconator-img_20130713_142010_101.jpg   The Baconator-img_20130713_142018_022.jpg  

Reply
Old Jul 13, 2013 | 08:26 PM
  #53  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

More Pics
Attached Thumbnails The Baconator-img_20130713_142027_138.jpg   The Baconator-img_20130713_142039_394.jpg   The Baconator-img_20130713_142052_596.jpg   The Baconator-img_20130713_142103_635.jpg  
Reply
Old Jul 15, 2013 | 10:25 AM
  #54  
jamorrowxj's Avatar
Seasoned Member
 
Joined: Nov 2012
Posts: 393
Likes: 0
From: new york
Model: Cherokee
Default

Wow that thing is trashed... But at least you have a good excuse to completely overhaul your axles and suspension lol and maybe patch the door too
Reply
Old Jul 15, 2013 | 10:42 AM
  #55  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Originally Posted by jamorrowxj
Wow that thing is trashed... But at least you have a good excuse to completely overhaul your axles and suspension lol and maybe patch the door too
Already welded the broken leaf to get it driveable (well into the garage) instead of pushing it. The front is locked and I'll just cut off LCA and weld a new piece on. The drive shaft has been put back in and honestly i could care less about the rear door because I'll probably be door less all summer until it gets cold then maybe just pick up a junkyard door.


Plans (depends on how much insurance money I get)

3" front coils to 5.5" coils Rubicon Express
replacing aal old broken leafs with 3.5" Rubicon Express leaf springs
shackle extension and Shackle drop (already installed)
Should net me around 6.5-7" in rear.
Skyjacker Shocks 5" in front (already have)
Skyjacker Shocks 6" in rear (already have)
SYE Eliminator + Double Cardon Drive shaft (4-6" lifted) Rough Country
Or Transfer Case drop (due to money) No brand picked yet
Sliders - Bolt on + weld to Pinch seem (already have)
Adjustable Track Bar (4-6" lifted) Rough Country
A/C Condenser + Lines (Already have)
Rusty's Tie Rod + Ends
Lower Control Arms (Already Have) Rough Country
Lower Control Arm bracket - Iron Rock Offroad
Extended Brake Lines - No company yet
Bedliner entire vehicle (black)
LockRight lunchbox locker for Chrysler 8.25 27-spline (depends on $$$)
Hella Offroad Lights

That's the current list of wanted and purchased parts in garage to install.
Reply
Old Jul 28, 2013 | 06:49 PM
  #56  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Parts are stacking up for baconator rebuild!!!
Attached Thumbnails The Baconator-image-3133865425.jpg   The Baconator-image-345423861.jpg   The Baconator-image-2769442360.jpg   The Baconator-image-2319185306.jpg  
Reply
Old Jul 28, 2013 | 07:38 PM
  #57  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

5.5" coils Rubicon Express
3.5" Rubicon Express leaf springs
shackle extension and Shackle drop (already installed)
Should net me around 6.5-7" in rear.
Skyjacker Shocks 5" in front (already have)
Skyjacker Shocks 6" in rear (already have)
SYE Eliminator + Double Cardon Drive shaft
Sliders - Bolt on + weld to Pinch seem (already have)
Adjustable Track Bar (4-6" lifted) Rough Country
A/C Condenser + Lines (Already have)
Tie Rod + Ends
Lower Control Arms (Already Have) Rough Country
Lower Control Arm bracket - Iron Rock Offroad
Extended Brake Lines - No company yet
Bedliner entire jeep including rims
Hella Offroad Lights
Irokoffroad throttle body spacer

That's the build list (final.....for now)
Reply
Old Jul 28, 2013 | 10:00 PM
  #58  
stang65's Avatar
CF Veteran
 
Joined: Aug 2012
Posts: 1,592
Likes: 0
From: oregon
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
Default

sounds like its almost time to get it back on the road
Reply
Old Aug 4, 2013 | 06:22 PM
  #59  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Baconator rebuild in affect.

Spent 11.5 hours yesterday with a few friends.

Bacon is now 6"ish overall but have all new suspension parts.
Attached Thumbnails The Baconator-image-130689107.jpg   The Baconator-image-1235474277.jpg   The Baconator-image-1960537857.jpg   The Baconator-image-174992229.jpg   The Baconator-image-2610203313.jpg  

The Baconator-image-4061627642.jpg   The Baconator-image-3638534616.jpg   The Baconator-image-1054273019.jpg   The Baconator-image-2609532721.jpg  
Reply
Old Aug 6, 2013 | 08:40 PM
  #60  
thebaconator's Avatar
Thread Starter
Member
 
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Default

Baconator out of garage and off jack stands :-)
Attached Thumbnails The Baconator-image-3591981908.jpg   The Baconator-image-84835520.jpg   The Baconator-image-468912137.jpg   The Baconator-image-2214480869.jpg   The Baconator-image-349498083.jpg  

Reply



All times are GMT -5. The time now is 09:03 AM.