The Baconator
Thread Starter
Member
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Thread Starter
Member
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
So I was looking through craigslist and found a post for a bumper for sale. Contacted CF's very own RatchetMaster10 and bought the bumper.
Also made a new friend that i'm pumped to go offroading with...when the schedules match up.
Installed the new bumper (still need to paint the front red clip)



Also made a new friend that i'm pumped to go offroading with...when the schedules match up.
Installed the new bumper (still need to paint the front red clip)



Thread Starter
Member
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
So I still had to change the front passenger shock and looking at the old shock it never came back from being compressed.
I then replaced it with a Gabriel Ultra Shock.


I then went to the back to check out the shocks and found they were nasty, muddy (due to me
), and rusty.


I then started to pull of the first bolt of the rear shocks and like 95% of all other XJ owners i snapped the bolt. So i stopped and will pick up after putting new bolts in.
I then replaced it with a Gabriel Ultra Shock.


I then went to the back to check out the shocks and found they were nasty, muddy (due to me


I then started to pull of the first bolt of the rear shocks and like 95% of all other XJ owners i snapped the bolt. So i stopped and will pick up after putting new bolts in.
Thread Starter
Member
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Picked these up today
Going to put on to finish front end then will paint flat black.
Also picked up new bolts for rear upper shock bolts since I snapped one. Probably will snap all so was planning ahead and got the 4 pack.
Going to put on to finish front end then will paint flat black.
Also picked up new bolts for rear upper shock bolts since I snapped one. Probably will snap all so was planning ahead and got the 4 pack.
Thread Starter
Member
Joined: Jun 2012
Posts: 224
Likes: 0
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output)
Originally Posted by rmoore1031
Impressive








